AutoCodes – Mercury – C1963 Mercury

C1963 Mercury Code - Stability Control Inhibit Warning

Quick Answer

The steering wheel rotation (in degrees) is sent to the ABS module. Common causes include Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted, Steering Wheel Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1963 Mercury indicates Stability Control Inhibit Warning.
Common causes: Common causes include Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted, Steering Wheel Angle Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,560

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 05, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1963 Mercury Description

The steering wheel rotation (in degrees) is sent to the ABS module. Voltage is supplied to the steering wheel angle sensor from the ABS module and ground is provided by the ABS module. The steering wheel rotation sensor monitor the steering wheel position when the slotted wheel in the clockspring assembly rotates through the infrared light generated by the sensor.

OBDII Code C1963 Mercury - Stability Control Inhibit Warning - AutoCodes.com — C1963 Mercury Code - Stability Control Inhibit Warning

What does this mean?

What are the Possible Causes of the DTC C1963 Mercury?

Faulty Steering Wheel Angle Sensor
Steering Wheel Angle Sensor harness is open or shorted
Steering Wheel Angle Sensor circuit poor electrical connection

How to Fix the DTC C1963 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1963 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1963 Mercury code?

Need more information on how to fix the C1963 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1963 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1963 Mercury Code

1. What are the common symptoms of OBDII code C1963 in a Mercury related to Stability Control Inhibit Warning?

The common symptoms include the stability control warning light illuminating on the dashboard, a message indicating "Stability Control Inhibit," and potentially reduced vehicle stability during driving.

2. What are the possible causes of OBDII code C1963 in a Mercury triggering the Stability Control Inhibit Warning?

Possible causes include a malfunction in the stability control system, issues with the wheel speed sensors, faulty ABS module, wiring problems, or sensor calibration errors.

3. How can I diagnose OBDII code C1963 in a Mercury for the Stability Control Inhibit Warning?

Diagnosis involves scanning the vehicle's onboard computer for the specific code, checking the stability control system components for any visible damage or wiring issues, and conducting a thorough inspection of the wheel speed sensors.

4. Are there any DIY repair tips for addressing OBDII code C1963 in a Mercury with the Stability Control Inhibit Warning?

DIY repair tips may include checking and cleaning the wheel speed sensors, ensuring proper sensor calibration, inspecting wiring connections, and resetting the stability control system by clearing the code.

5. Is it safe to drive a Mercury with the Stability Control Inhibit Warning due to OBDII code C1963?

It is not recommended to drive the vehicle extensively with the Stability Control Inhibit Warning illuminated, as it may lead to reduced stability and control while driving, especially in challenging road conditions.

6. How much does it typically cost to repair OBDII code C1963 in a Mercury associated with the Stability Control Inhibit Warning?

The repair costs can vary depending on the exact cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.

7. Can resetting the OBDII code C1963 in a Mercury turn off the Stability Control Inhibit Warning?

Resetting the code may temporarily turn off the warning light, but if the underlying issue causing the code is not addressed, the warning is likely to reappear.

8. Will driving with the Stability Control Inhibit Warning affect other vehicle systems in a Mercury?

Continued driving with the Stability Control Inhibit Warning may not only impact the stability control system but also potentially affect other safety features and systems that rely on input from the stability control module.

9. Is it necessary to visit a dealership or mechanic to address OBDII code C1963 in a Mercury for the Stability Control Inhibit Warning?

While some DIY repairs may be possible, it is recommended to seek professional help from a dealership or qualified mechanic to accurately diagnose and repair the specific issue triggering the Stability Control Inhibit Warning.