AutoCodes – Ford – C1960 Ford

C1960 Ford Code - Driver Brake Apply Circuit Fault

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Driver Brake Apply. Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1960 Ford indicates Driver Brake Apply Circuit Fault.
Common causes: Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,663

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 05, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1960 Ford Description

The Anti-Lock Brake System (ABS) Module monitors the Driver Brake Apply. The ABS Module sets the OBDII code when the Driver Brake Apply is not to factory specifications.

OBDII Code C1960 Ford - Driver Brake Apply Circuit Fault - AutoCodes.com — C1960 Ford Code - Driver Brake Apply Circuit Fault

What does this mean?

What are the Possible Causes of the DTC C1960 Ford?

Faulty Brake Switch
Brake Switch harness is open or shorted
Brake Switch circuit poor electrical connection

How to Fix the DTC C1960 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1960 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1960 Ford code?

Need more information on how to fix the C1960 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1960 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1960 Ford Code

1. What are the common symptoms of OBDII code C1960 in a Ford related to the Driver Brake Apply Circuit Fault?

- Common symptoms include the brake warning light being illuminated on the dashboard, potential loss of brake assist, and possible issues with the vehicle's stability control system.

2. What are the possible causes of the Driver Brake Apply Circuit Fault OBDII code C1960 in a Ford?

- Possible causes may include a faulty brake pedal position sensor, damaged wiring or connectors in the brake system, or issues with the brake control module.

3. How can I diagnose the Driver Brake Apply Circuit Fault OBDII code C1960 in my Ford vehicle?

- Diagnosing this code usually involves using a diagnostic scanner to retrieve the specific trouble code, inspecting the brake pedal position sensor and associated wiring, and testing the brake control module for faults.

4. Can I continue driving my Ford with the C1960 OBDII code related to the Driver Brake Apply Circuit Fault?

- It is not recommended to continue driving your vehicle with this fault as it may affect the proper functioning of the braking system and compromise safety. It's best to address the issue promptly.

5. How can I repair the Driver Brake Apply Circuit Fault OBDII code C1960 in my Ford?

- Repairs may involve replacing a faulty brake pedal position sensor, repairing damaged wiring or connectors, or reprogramming the brake control module. It's advisable to consult a professional mechanic for accurate diagnosis and repair.

6. Is it safe to reset the OBDII code C1960 related to the Driver Brake Apply Circuit Fault in my Ford without addressing the underlying issue?

- While clearing the code may temporarily turn off the warning light, it's crucial to address the root cause of the fault to ensure the proper functioning of the brake system and vehicle safety.

7. How can I prevent the recurrence of the OBDII code C1960 in my Ford after repair?

- To prevent the code from reappearing, ensure that all repairs are done correctly, use quality replacement parts, and regularly inspect the brake system for any signs of wear or damage.

8. Will the Driver Brake Apply Circuit Fault OBDII code C1960 affect the overall performance of my Ford vehicle?

- Yes, this fault can impact the performance of the vehicle, particularly the braking system and stability control. It's essential to address the issue promptly to maintain optimal performance and safety.

9. Are there any safety precautions I should take if I suspect the Driver Brake Apply Circuit Fault in my Ford?

- If you suspect this fault, it's recommended to drive cautiously, avoid sudden braking or maneuvers, and have the vehicle inspected by a qualified mechanic as soon as possible to ensure safety.

10. Can a DIY enthusiast with basic automotive knowledge repair the OBDII code C1960 related to the Driver Brake Apply Circuit Fault in a Ford?

- While some simple inspections and repairs can be done by DIY enthusiasts, diagnosing and repairing complex issues like this code may require specialized tools and expertise. Consulting a professional mechanic is advisable for proper diagnosis and repair.