C1924 Mercury Code - VAPS Solenoid Actuator Output Circuit Short To Ground
Quick Answer
The Air Suspension Module monitors the Variable-Assist Power Steering (VAPS) Solenoid Actuator. Common causes include Faulty Variable-Assist Power Steering (VAPS) Solenoid Actuator, Variable-Assist Power Steering (VAPS) Solenoid Actuator harness is open or shorted, Variable-Assist Power Steering (VAPS) Solenoid Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1924 Mercury indicates VAPS Solenoid Actuator Output Circuit Short To Ground.
- Common causes
- Common causes include Faulty Variable-Assist Power Steering (VAPS) Solenoid Actuator, Variable-Assist Power Steering (VAPS) Solenoid Actuator harness is open or shorted, Variable-Assist Power Steering (VAPS) Solenoid Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1924 Mercury Description
What are the Possible Causes of the DTC C1924 Mercury?
- Faulty Variable-Assist Power Steering (VAPS) Solenoid Actuator
- Variable-Assist Power Steering (VAPS) Solenoid Actuator harness is open or shorted
- Variable-Assist Power Steering (VAPS) Solenoid Actuator circuit poor electrical connection
- Faulty Air Suspension Module
How to Fix the DTC C1924 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1924 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1924 Mercury code?
Need more information on how to fix the C1924 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1924 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1924 Mercury Code
1. What does the OBDII code C1924 mean on a Mercury vehicle?
It indicates a problem with the VAPS (Variable Assist Power Steering) Solenoid Actuator Output Circuit, specifically a short to ground.
2. What are the common symptoms of the C1924 code in a Mercury?
Symptoms include stiff or unresponsive steering, inconsistent steering assist, and possibly the illumination of the power steering or check engine light.
3. What causes the C1924 code to appear in a Mercury?
The code is typically caused by a shorted wiring harness, a faulty VAPS solenoid, or a malfunctioning power steering control module.
4. Can I drive my Mercury with the C1924 code active?
While you can drive, steering may be more difficult, especially at lower speeds, increasing the risk of an accident in certain situations.
5. How do I diagnose the C1924 code in a Mercury?
Use a multimeter to check for shorted wiring in the VAPS circuit, inspect the solenoid for damage, and test the power steering control module for proper function.
6. What should I check first when troubleshooting the C1924 code?
Start by inspecting the wiring and connectors to the VAPS solenoid for signs of damage, corrosion, or short circuits.
7. How is the C1924 code typically repaired?
Repairs may include replacing the damaged wiring, fixing short circuits, replacing the VAPS solenoid, or reprogramming or replacing the power steering control module.
8. How much does it cost to fix the C1924 code on a Mercury?
Costs vary depending on the issue but can range from $100 for wiring repairs to $500 or more for solenoid or module replacement.
9. Can a faulty battery or alternator cause the C1924 code?
Yes, low voltage or inconsistent power supply can potentially affect the VAPS system, so ensure the battery and alternator are functioning properly.
10. Do I need to clear the C1924 code after repairs?
Yes, after completing repairs, you should clear the code using an OBDII scanner and test drive the vehicle to ensure the issue is resolved.
Discuss the causes and fixes for C1924 Mercury OBDII Code
Code C1924 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
