AutoCodesToyota – C1691 2014 Toyota RAV4

C1691 2014 Toyota RAV4 Code - Back Camera Initialization Incomplete

Quick Answer

This Diagnostic Trouble Code (DTC) is stored when the Television Camera Assembly judges that the Back Camera initial setting has not been memorized (Back Camera position setting is incomplete). Common causes include Back Camera position setting, Faulty Television Camera Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1691 2014 Toyota RAV4 indicates Back Camera Initialization Incomplete.
Common causes
Common causes include Back Camera position setting, Faulty Television Camera Assembly.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 305
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 27, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1691 2014 Toyota RAV4 Description

This Diagnostic Trouble Code (DTC) is stored when the Television Camera Assembly judges that the Back Camera initial setting has not been memorized (Back Camera position setting is incomplete).
OBDII Code C1691 2014 Toyota RAV4 - Back Camera Initialization Incomplete - AutoCodes.com
C1691 2014 Toyota RAV4 Code - Back Camera Initialization Incomplete

What are the Possible Causes of the DTC C1691 2014 Toyota RAV4?

  • Back Camera position setting
  • Faulty Television Camera Assembly

How to Fix the DTC C1691 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1691 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1691 2014 Toyota RAV4 code?

Need more information on how to fix the C1691 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1691 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1691 2014 Toyota RAV4 Code

1. What does the OBDII code C1691 mean on a 2014 Toyota RAV4?

C1691 indicates that the back camera initialization process is incomplete, often due to a calibration or configuration issue with the parking assist camera system.

2. What are the common symptoms of code C1691 in a 2014 Toyota RAV4?

The symptoms typically include the rearview camera not displaying an image, distorted or misaligned guide lines, or the parking assist system being inoperative.

3. What causes the C1691 code in a 2014 Toyota RAV4?

This code is usually caused by improper initialization of the back camera, a recent battery disconnect, software issues, or a faulty camera module.

4. Can a low battery cause the C1691 code to appear?

Yes, a low or recently disconnected battery can reset the system, requiring the back camera to be re-initialized.

5. How do you fix the C1691 code on a 2014 Toyota RAV4?

The issue can often be resolved by re-initializing the back camera using a compatible scan tool or performing a system reset through the vehicle’s settings or dealership tools.

6. Do I need to replace the rearview camera to fix code C1691?

Not necessarily. Most cases involve re-initialization, but if the camera or wiring is damaged, replacement may be required.

7. Can I drive my 2014 Toyota RAV4 with the C1691 code active?

Yes, you can drive the vehicle, but the back camera or parking assist features may not function properly, which could reduce convenience and safety during reversing.

8. Is the C1691 code covered under warranty for a 2014 Toyota RAV4?

It depends on your warranty coverage and whether the issue is deemed a manufacturing defect. Consult your Toyota dealer for details.

9. Can a DIYer fix the C1691 code without professional tools?

In some cases, the issue can be resolved by disconnecting and reconnecting the battery or navigating system settings, but a scan tool may be required for proper initialization.

10. How much does it cost to fix code C1691 on a 2014 Toyota RAV4?

The cost can range from $0 for a DIY reset to $100–$200 if professional re-initialization or diagnostics are needed at a dealership.

Discuss the causes and fixes for C1691 2014 Toyota RAV4 OBDII Code

Code C1691 2014 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play