AutoCodes – Toyota – C1691 2013 Toyota RAV4

C1691 2013 Toyota RAV4 Code - Back Camera Initialization Incomplete

Quick Answer

This Diagnostic Trouble Code (DTC) is stored when the Television Camera Assembly judges that the Back Camera initial setting has not been memorized (Back Camera position setting is incomplete). Common causes include Back Camera position setting, Faulty Television Camera Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1691 2013 Toyota RAV4 indicates Back Camera Initialization Incomplete.
Common causes
Common causes include Back Camera position setting, Faulty Television Camera Assembly.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 282
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 27, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C1691 2013 Toyota RAV4 Description

This Diagnostic Trouble Code (DTC) is stored when the Television Camera Assembly judges that the Back Camera initial setting has not been memorized (Back Camera position setting is incomplete).
OBDII Code C1691 2013 Toyota RAV4 - Back Camera Initialization Incomplete - AutoCodes.com
C1691 2013 Toyota RAV4 Code - Back Camera Initialization Incomplete

What are the Possible Causes of the DTC C1691 2013 Toyota RAV4?

  • Back Camera position setting
  • Faulty Television Camera Assembly

How to Fix the DTC C1691 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1691 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1691 2013 Toyota RAV4 code?

Need more information on how to fix the C1691 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1691 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1691 2013 Toyota RAV4 Code

1. What does the OBDII code C1691 mean on a 2013 Toyota RAV4?

Code C1691 indicates that the initialization process for the back camera system is incomplete or unsuccessful.

2. What are the common symptoms of code C1691 in a 2013 Toyota RAV4?

The most common symptom is the rearview camera not displaying properly or failing to activate when the vehicle is in reverse.

3. What causes the C1691 code to appear on a 2013 Toyota RAV4?

Causes include improper back camera calibration, a software issue, or a malfunction in the camera system or related wiring.

4. Can a weak battery cause the C1691 code in a 2013 Toyota RAV4?

Yes, a weak or disconnected battery can interrupt the camera initialization process and trigger this code.

5. How do I fix the C1691 code on a 2013 Toyota RAV4?

Perform the back camera initialization process using a diagnostic scan tool, and check for any wiring or hardware issues with the camera system.

6. Do I need special tools to clear the C1691 code on a 2013 Toyota RAV4?

Yes, a Toyota-compatible diagnostic scan tool or software is required to reinitialize the back camera system.

7. Can I drive with the C1691 code active on my 2013 Toyota RAV4?

Yes, the code does not affect the drivability of the vehicle, but the rearview camera may not function, which could compromise safety while reversing.

8. Will disconnecting the battery clear the C1691 code on a 2013 Toyota RAV4?

Disconnecting the battery will not clear the code; the camera system must be reinitialized using a diagnostic tool.

9. Could a faulty rearview camera cause the C1691 code in a 2013 Toyota RAV4?

Yes, a malfunctioning or damaged rearview camera could prevent successful initialization and trigger the code.

10. Is the C1691 code covered under warranty for a 2013 Toyota RAV4?

It depends on the warranty terms. If the vehicle is still under warranty and the issue is due to a defect, it may be covered. Check with your Toyota dealer for details.

Discuss the causes and fixes for C1691 2013 Toyota RAV4 OBDII Code

Code C1691 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play