C1608 Nissan Code - Electric Power Steering Control Unit
Quick Answer
The Electric Power Steering (EPS) Control Unit performs an arithmetical operation on data, such as steering wheel turning force (sensor signal) from the torque sensor, vehicle speed signal, etc. Common causes include Faulty Electric Power Steering Control Unit, Electric Power Steering Control Unit harness is open or shorted, Electric Power Steering Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1608 Nissan indicates Electric Power Steering Control Unit.
- Common causes
- Common causes include Faulty Electric Power Steering Control Unit, Electric Power Steering Control Unit harness is open or shorted, Electric Power Steering Control Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1608 Nissan Description
- EPS control unit outputs optimum assist torque signal to EPS motor.
- EPS control unit reduces output signals to EPS motor and protects EPS motor and EPS control unit when using power steering continuously and excessively.
- As a fail-safe function, turned off output signal to EPS motor and then enters a manual steering state, if malfunction is detected in EPS system.
What are the Possible Causes of the DTC C1608 Nissan?
- Faulty Electric Power Steering Control Unit
- Electric Power Steering Control Unit harness is open or shorted
- Electric Power Steering Control Unit circuit poor electrical connection
How to Fix the DTC C1608 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1608 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1608 Nissan code?
Need more information on how to fix the C1608 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1608 Nissan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1608 Nissan Code
1. What are the common symptoms of OBDII code C1608 in a Nissan related to the Electric Power Steering Control Unit?
- Common symptoms include stiff or heavy steering, steering wheel vibration, and the EPS warning light illuminated on the dashboard.
2. What are some possible causes of OBDII code C1608 in a Nissan Electric Power Steering Control Unit?
- Possible causes include a faulty electric power steering control unit, damaged wiring harness, low power steering fluid levels, or a malfunctioning steering angle sensor.
3. How can I diagnose the OBDII code C1608 in my Nissan's Electric Power Steering Control Unit?
- Diagnose the code by using an OBDII scanner to retrieve the specific error code, checking the power steering fluid level, inspecting the wiring harness for damage, and testing the electric power steering control unit for faults.
4. Can I drive my Nissan with OBDII code C1608 related to the Electric Power Steering Control Unit?
- It is not recommended to drive the vehicle with this code as it may result in unsafe driving conditions due to potential steering issues.
5. How can I repair OBDII code C1608 in my Nissan Electric Power Steering Control Unit?
- Repair options include replacing the faulty electric power steering control unit, repairing any damaged wiring, ensuring proper power steering fluid levels, and recalibrating the steering angle sensor.
6. Is it possible to reset OBDII code C1608 in a Nissan Electric Power Steering Control Unit?
- The code can be reset using an OBDII scanner, but it is important to diagnose and repair the underlying issue causing the code before resetting it.
7. Are there any DIY tips for troubleshooting OBDII code C1608 in a Nissan's Electric Power Steering Control Unit?
- DIY tips include checking the power steering fluid level, inspecting the wiring harness for visible damage, and ensuring all electrical connections are secure and free of corrosion.
8. What are the potential risks of ignoring OBDII code C1608 in a Nissan related to the Electric Power Steering Control Unit?
- Ignoring the code can lead to unsafe driving conditions, loss of power steering assistance, and potential damage to other steering components.
9. Can weather conditions affect the occurrence of OBDII code C1608 in a Nissan's Electric Power Steering Control Unit?
- Extreme weather conditions such as extreme cold or heat can impact the performance of the electric power steering system and potentially trigger the code.
10. How much does it typically cost to repair OBDII code C1608 in a Nissan Electric Power Steering Control Unit?
- The cost of repair can vary depending on the specific issue causing the code, but it may range from $200 to $800 including parts and labor.
Discuss the causes and fixes for C1608 Nissan OBDII Code
Code C1608 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
