C1592 Code - Actuator Neutral Position Calibration Incomplete
Quick Answer
The Steering Control ECU first checks the actuator angle neutral position calibration flag after entering test mode. Common causes include Faulty Steering Actuator, Faulty Steering Control ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1592 indicates Actuator Neutral Position Calibration Incomplete.
- Common causes
- Common causes include Faulty Steering Actuator, Faulty Steering Control ECU.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1592 Description
What are the Possible Causes of the DTC C1592?
- Faulty Steering Actuator
- Faulty Steering Control ECU
How to Fix the DTC C1592?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1592 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1592 code?
Need more information on how to fix the C1592 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1592 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1592 Lexus — Actuator Neutral Position Calibration Incomplete
- C1592 Scion — Actuator Neutral Position Calibration Incomplete
- C1592 Toyota — Actuator Neutral Position Calibration Incomplete
Frequently Asked Questions about C1592 Code
1. What does OBDII code C1592 mean?
C1592 indicates that the Actuator Neutral Position Calibration is incomplete, often related to the steering angle sensor or other components requiring calibration.
2. What are the common symptoms of code C1592?
Symptoms may include a malfunction indicator light (MIL), stability control or traction control warnings, and abnormal steering behavior.
3. What causes code C1592 to appear?
Common causes include a recently replaced steering or suspension component, a low or disconnected battery, or a failed calibration process.
4. How is C1592 diagnosed?
Technicians use a scan tool to confirm the code, check calibration status, inspect related sensors, and verify proper connections in the steering and suspension system.
5. Can I drive with code C1592 active?
While the vehicle may still be drivable, it’s not recommended as it can affect safety systems like traction and stability control.
6. How do you fix OBDII code C1592?
The most common fix is to recalibrate the actuator neutral position using a scan tool or perform a steering angle sensor reset.
7. Do I need special tools to clear code C1592?
Yes, a professional-grade scan tool capable of performing actuator or steering angle calibration is required.
8. Can a dead battery trigger code C1592?
Yes, a dead or disconnected battery can erase calibration data, leading to this code.
9. How much does it cost to fix code C1592?
The cost varies but typically ranges from $100 to $250, depending on whether recalibration or additional repairs are needed.
10. Is code C1592 specific to certain vehicle brands?
While C1592 is more common in certain vehicles with advanced steering or electronic stability systems, it can appear in various makes and models. Always consult your vehicle’s service manual.
Discuss the causes and fixes for C1592 OBDII Code
Code C1592 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
