AutoCodes – Toyota – C1582 2014 Toyota RAV4

C1582 2014 Toyota RAV4 Code - Assist Map Number Mismatch

Quick Answer

When an incorrect ECM, an incorrect brake actuator assembly or an incorrect main body ECU is installed after the assist map has been written in the power steering ECU assembly, then Diagnostic Trouble Code (DTC) C1582/26 is stored because the data does not match the vehicle specifications. Common causes include Incorrect Engine Control Module (ECM), Incorrect Skid Control ECU (Brake Actuator Assembly), Incorrect Main Body ECU (Multiplex Network Body ECU). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1582 2014 Toyota RAV4 indicates Assist Map Number Mismatch.
Common causes
Common causes include Incorrect Engine Control Module (ECM), Incorrect Skid Control ECU (Brake Actuator Assembly), Incorrect Main Body ECU (Multiplex Network Body ECU).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 227
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 26, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C1582 2014 Toyota RAV4 Description

When an incorrect ECM, an incorrect brake actuator assembly or an incorrect main body ECU is installed after the assist map has been written in the power steering ECU assembly, then Diagnostic Trouble Code (DTC) C1582/26 is stored because the data does not match the vehicle specifications.
OBDII Code C1582 2014 Toyota RAV4 - Assist Map Number Mismatch - AutoCodes.com
C1582 2014 Toyota RAV4 Code - Assist Map Number Mismatch

What are the Possible Causes of the DTC C1582 2014 Toyota RAV4?

  • Incorrect Engine Control Module (ECM)
  • Incorrect Skid Control ECU (Brake Actuator Assembly)
  • Incorrect Main Body ECU (Multiplex Network Body ECU)
  • Faulty Power Steering ECU

How to Fix the DTC C1582 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1582 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1582 2014 Toyota RAV4 code?

Need more information on how to fix the C1582 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1582 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1582 2014 Toyota RAV4 Code

What does OBDII code C1582 mean for a 2014 Toyota RAV4?

Code C1582 indicates an Assist Map Number Mismatch in the steering system, typically related to the Electric Power Steering (EPS) module.

What are the common symptoms of code C1582 in a 2014 Toyota RAV4?

Symptoms may include a warning light on the dashboard, reduced or inconsistent power steering assist, and difficulty steering.

What causes code C1582 in a 2014 Toyota RAV4?

This code is usually caused by mismatched calibration data in the EPS system, often due to improper programming or replacement of related components.

Can code C1582 be triggered by a dead or weak battery?

Yes, a weak or dead battery can cause communication issues within the EPS module, potentially triggering this code.

How can I fix code C1582 in my 2014 Toyota RAV4?

Repair typically involves reprogramming or recalibrating the EPS module using manufacturer-specific tools to ensure correct assist map settings.

Is it safe to drive with code C1582 active in a 2014 Toyota RAV4?

Driving may be possible but not recommended, as you could experience unpredictable or reduced steering assistance, which can compromise safety.

Do I need special tools to fix code C1582 in a 2014 Toyota RAV4?

Yes, resolving this code usually requires specialized diagnostic equipment capable of recalibrating the EPS module, such as a Toyota Techstream tool.

Can a software update resolve code C1582 in a 2014 Toyota RAV4?

Yes, a software update may fix mismatched assist map data if the issue is related to outdated EPS module programming.

How much does it cost to repair code C1582 on a 2014 Toyota RAV4?

Repair costs vary but may range from $100 to $300 for recalibration or software updates, depending on labor rates and the tools required.

Should I consult a professional to diagnose code C1582 in a 2014 Toyota RAV4?

Yes, professional diagnosis is recommended to ensure the EPS module is properly recalibrated and other potential issues are ruled out.

Discuss the causes and fixes for C1582 2014 Toyota RAV4 OBDII Code

Code C1582 2014 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play