AutoCodes – Jeep – C1567 Jeep

C1567 Jeep Code - Right Rear Ride Height Level Performance

Quick Answer

The Air Suspension Control Module (ASCM) monitors the Ride Height Air Pump. Common causes include Air System Leak, Faulty Air Suspension Control Module (ASCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1567 Jeep indicates Right Rear Ride Height Level Performance.
Common causes: Common causes include Air System Leak, Faulty Air Suspension Control Module (ASCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,181

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 01, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1567 Jeep Description

The Air Suspension Control Module (ASCM) monitors the Ride Height Air Pump. The ASCM sets the OBDII code when it detects the Air Spring Valve as been used for a time exceeding three minutes within the last ten minutes.

OBDII Code C1567 Jeep - Right Rear Ride Height Level Performance - AutoCodes.com — C1567 Jeep Code - Right Rear Ride Height Level Performance

What does this mean?

What are the Possible Causes of the DTC C1567 Jeep?

Air System Leak
Faulty Air Suspension Control Module (ASCM)

How to Fix the DTC C1567 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1567 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1567 Jeep code?

Need more information on how to fix the C1567 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1567 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1567 Jeep Code

1. What are the common symptoms of OBDII code C1567 in a Jeep related to right rear ride height level performance?

- Common symptoms include uneven ride height, a noticeable tilt or sag on the right rear side of the vehicle, and a bumpy or uncomfortable ride.

2. What are the possible causes of OBDII code C1567 indicating right rear ride height level performance issues in a Jeep?

- The code may be triggered by a faulty ride height sensor, a damaged air suspension component, air leaks in the system, or electrical issues.

3. How can I diagnose the cause of OBDII code C1567 in my Jeep specifically related to the right rear ride height level performance?

- Diagnose by visually inspecting the right rear suspension components, checking for air leaks, testing the ride height sensor, and scanning for other related trouble codes.

4. What are some basic repair tips for addressing OBDII code C1567 in a Jeep related to right rear ride height level performance?

- Start by checking and repairing any visible damage to the suspension components, replacing faulty ride height sensors, fixing air leaks, and ensuring proper electrical connections.

5. Can I drive my Jeep with OBDII code C1567 indicating right rear ride height level performance issues?

- It is not recommended to drive the vehicle extensively with this code as it can affect ride comfort, stability, and overall handling of the Jeep.

6. How much does it typically cost to repair OBDII code C1567 in a Jeep related to right rear ride height level performance?

- The cost of repair can vary depending on the specific issue, but it can range from a few hundred to over a thousand dollars, considering parts and labor.

7. Are there any safety concerns associated with OBDII code C1567 in a Jeep related to right rear ride height level performance?

- Yes, driving with ride height level performance issues can impact the vehicle's stability, braking, and overall safety, so it is important to address the problem promptly.

8. Can resetting the OBDII code C1567 in my Jeep fix the right rear ride height level performance issue?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the right rear ride height level performance issue.

9. How long does it typically take to repair OBDII code C1567 in a Jeep related to right rear ride height level performance?

- The repair time can vary depending on the exact cause of the issue, but it may take a few hours to a full day to diagnose and fix the problem effectively.

10. Should I attempt to repair OBDII code C1567 in my Jeep related to right rear ride height level performance myself, or is it best to seek professional help?

- Due to the complexity of diagnosing and repairing issues related to ride height level performance, it is recommended to seek professional help from a certified mechanic or dealership.