C1517 Mercury Code - Roll Rate Sensor Circuit Failure
Quick Answer
The yaw rate sensor, roll rate sensor, lateral accelerometer and longitudinal accelerometer are contained in one module called the stability control sensor cluster. Common causes include Faulty Stability Control Sensor Cluster, Stability Control Sensor Cluster harness is open or shorted, Stability Control Sensor Cluster circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1517 Mercury indicates Roll Rate Sensor Circuit Failure.
- Common causes
- Common causes include Faulty Stability Control Sensor Cluster, Stability Control Sensor Cluster harness is open or shorted, Stability Control Sensor Cluster circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1517 Mercury Description
The ABS module provides power to the sensor cluster and ground. The sensor cluster and the ABS module communicate. An open circuit or a short to power or ground on any one of these 4 circuits will cause the ABS module to set a DTC. Also, if the sensor cluster is not mounted in the correct position, with the electrical connector facing the passenger seat, the ABS module will also set DTCs.
What are the Possible Causes of the DTC C1517 Mercury?
- Faulty Stability Control Sensor Cluster
- Stability Control Sensor Cluster harness is open or shorted
- Stability Control Sensor Cluster circuit poor electrical connection
How to Fix the DTC C1517 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1517 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1517 Mercury code?
Need more information on how to fix the C1517 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1517 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1517 Mercury Code
1. What are the common symptoms of OBDII code C1517 in a Mercury vehicle?
The common symptoms of OBDII code C1517, which indicates a Roll Rate Sensor Circuit Failure in a Mercury vehicle, may include the traction control and stability control lights illuminated on the dashboard, erratic vehicle handling, and potential loss of stability control features.
2. What are the possible causes of OBDII code C1517 in a Mercury?
The possible causes of OBDII code C1517 in a Mercury vehicle can include a faulty roll rate sensor, damaged wiring or connectors in the roll rate sensor circuit, or a malfunction in the stability control system.
3. How can I diagnose the Roll Rate Sensor Circuit Failure in my Mercury when OBDII code C1517 is triggered?
Diagnosing the Roll Rate Sensor Circuit Failure in your Mercury involves using a diagnostic scanner to retrieve the trouble code, inspecting the roll rate sensor and its wiring for damage, and performing tests to determine if the sensor is functioning properly.
4. Can I continue driving my Mercury with OBDII code C1517 present?
It is not recommended to continue driving your Mercury with OBDII code C1517 (Roll Rate Sensor Circuit Failure) present, as it can affect the vehicle's stability control system and potentially compromise your safety on the road.
5. How can I repair OBDII code C1517 in my Mercury?
Repairing OBDII code C1517 in your Mercury may involve replacing the faulty roll rate sensor, repairing damaged wiring or connectors in the sensor circuit, or addressing any underlying issues in the stability control system as needed.
6. Is it possible to reset OBDII code C1517 in a Mercury without fixing the underlying issue?
While you can clear the trouble code using a diagnostic scanner, it is crucial to address the underlying issue causing OBDII code C1517 in your Mercury to ensure the stability control system functions correctly and maintains your safety on the road.
7. How much does it typically cost to repair OBDII code C1517 in a Mercury?
The cost of repairing OBDII code C1517 in a Mercury can vary depending on the specific cause of the issue, the parts needed for the repair, and labor costs. It is recommended to consult with a qualified mechanic for an accurate estimate.
8. Can extreme weather conditions trigger OBDII code C1517 in a Mercury?
Extreme weather conditions, such as severe cold or heat, can potentially affect the performance of sensors and electronic components in a vehicle, including the roll rate sensor that may trigger OBDII code C1517 in a Mercury.
9. Will OBDII code C1517 cause my Mercury to fail an emissions test?
OBDII code C1517 itself may not cause your Mercury to fail an emissions test, but it is essential to address the issue promptly to ensure the vehicle's stability control system is functioning correctly, which can indirectly impact overall emissions performance.
10. How long does it usually take to repair OBDII code C1517 in a Mercury?
The time required to repair OBDII code C1517 in a Mercury can vary depending on the complexity of the issue, availability of parts, and the mechanic's experience. It is advisable to consult with a professional technician for a more accurate timeframe.
Discuss the causes and fixes for C1517 Mercury OBDII Code
Code C1517 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
