C1513 Code - Torque Sensor Deviation Excessive
Quick Answer
The torque sensor converts the rotation torque input from the steering wheel into electric signals and sends them to the Power Steering ECU. Common causes include Faulty Torque Sensor (built into steering column assembly), Torque Sensor harness is open or shorted, Torque Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1513 indicates Torque Sensor Deviation Excessive.
- Common causes
- Common causes include Faulty Torque Sensor (built into steering column assembly), Torque Sensor harness is open or shorted, Torque Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1513 Description
What are the Possible Causes of the DTC C1513?
- Faulty Torque Sensor (built into steering column assembly)
- Torque Sensor harness is open or shorted
- Torque Sensor circuit poor electrical connection
- Faulty Power Steering ECU
How to Fix the DTC C1513?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1513 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1513 code?
Need more information on how to fix the C1513 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1513 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1513 Lexus — Torque Sensor Deviation Excessive
- C1513 Scion — Torque Sensor Deviation Excessive
- C1513 Toyota — Torque Sensor Deviation Excessive
Frequently Asked Questions about C1513 Code
1. What are the common symptoms of OBDII code C1513 - Torque Sensor Deviation Excessive?
- Common symptoms include difficulty steering, steering wheel vibration, and the traction control system being disabled.
2. What are the potential causes of OBDII code C1513?
- The code C1513 can be triggered by a faulty torque sensor, damaged wiring in the steering system, or a malfunctioning Electronic Stability Control (ESC) module.
3. How serious is OBDII code C1513 - Torque Sensor Deviation Excessive?
- This code is considered serious as it affects the steering and stability control system of the vehicle, potentially compromising the safety of the driver and passengers.
4. Can I continue driving with OBDII code C1513 present?
- It is not recommended to drive with this code present as it can lead to unpredictable steering behavior and compromised stability control.
5. How can I diagnose the cause of OBDII code C1513?
- Diagnosis typically involves using a scan tool to retrieve the code and then conducting a thorough inspection of the steering system, torque sensor, and wiring for any visible issues.
6. What are some repair tips for addressing OBDII code C1513?
- Repair may involve recalibrating the torque sensor, repairing or replacing damaged wiring, or replacing the torque sensor or ESC module as needed.
7. Can I reset OBDII code C1513 without fixing the underlying issue?
- While you can clear the code temporarily, it is crucial to address the root cause to prevent the issue from recurring and ensure the safety of the vehicle.
8. How much does it typically cost to repair OBDII code C1513?
- The cost of repair can vary depending on the specific cause of the code, but it may range from a few hundred to a thousand dollars including parts and labor.
9. How long does it take to repair OBDII code C1513?
- The repair time can vary based on the extent of the issue and the specific components needing attention, but it may take a few hours to a full day at the repair shop.
10. Can OBDII code C1513 be prevented?
- Regular maintenance of the steering system, including checking for any signs of wear or damage, can help prevent issues that may trigger OBDII code C1513.
Discuss the causes and fixes for C1513 OBDII Code
Code C1513 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
