AutoCodes – Jeep – C1501 Jeep

C1501 Jeep Code - Tire Pressure Sensor 1

Quick Answer

The Right Front Hub will monitor the signals from the active road tire Tire Pressure Monitor (TPM) Sensors. Common causes include Faulty Tire Pressure Sensor, Tire Pressure Sensor harness is open or shorted, Tire Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1501 Jeep indicates Tire Pressure Sensor 1.
Common causes: Common causes include Faulty Tire Pressure Sensor, Tire Pressure Sensor harness is open or shorted, Tire Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,421

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 25, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1501 Jeep Description

The Right Front Hub will monitor the signals from the active road tire Tire Pressure Monitor (TPM) Sensors. This code sets if pressure, temperature, or acceleration data is not received or cannot be accurately decoded for a maximum of 20 minutes.

OBDII Code C1501 Jeep - Tire Pressure Sensor 1 - AutoCodes.com — C1501 Jeep Code - Tire Pressure Sensor 1

What does this mean?

What are the Possible Causes of the DTC C1501 Jeep?

Faulty Tire Pressure Sensor
Tire Pressure Sensor harness is open or shorted
Tire Pressure Sensor circuit poor electrical connection

How to Fix the DTC C1501 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1501 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1501 Jeep code?

Need more information on how to fix the C1501 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1501 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1501 Jeep Code

1. What are the common symptoms of OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

The common symptoms include the Tire Pressure Monitoring System (TPMS) warning light illuminating on the dashboard and potential issues with monitoring tire pressure.

2. What are the possible causes of OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

Possible causes include a malfunctioning tire pressure sensor, low tire pressure, damaged sensor, issues with the TPMS module, or wiring/connectivity problems.

3. How can I diagnose the cause of OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

You can start by checking the tire pressure of all tires, inspecting the sensors for damage, resetting the TPMS system, and using a diagnostic tool to read sensor data and identify the faulty component.

4. Can I reset OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1 without fixing the issue?

Resetting the code without addressing the underlying problem may temporarily turn off the warning light, but the issue will likely reappear as the root cause remains unresolved.

5. Is it safe to drive with OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

It is generally safe to drive with this code, but it is important to manually check tire pressure regularly to ensure safe driving conditions and prevent potential tire damage.

6. How much does it typically cost to repair OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

The cost of repair can vary depending on the exact cause, but it may involve replacing a faulty sensor, repairing wiring/connectivity issues, or recalibrating the TPMS system, with costs ranging from $50 to $200 or more.

7. Can I replace the tire pressure sensor myself to fix OBDII code C1501 in a Jeep?

Replacing a tire pressure sensor can be a DIY task for those with mechanical skills and the necessary tools. However, proper calibration and programming may require specialized equipment or professional assistance.

8. Are there any preventive measures to avoid OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

Maintaining proper tire pressure, regularly checking the TPMS system, and addressing any warning lights promptly can help prevent issues that trigger this OBDII code.

9. How long does it take to repair OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1?

The repair time can vary based on the specific cause, but a simple sensor replacement may take around 30 minutes to an hour, while more complex issues could require additional diagnostic time.

10. Will OBDII code C1501 in a Jeep related to Tire Pressure Sensor 1 affect the vehicle's performance?

This code typically does not affect the vehicle's performance directly, but ignoring it can lead to inaccurate tire pressure readings, potentially compromising safety and fuel efficiency.