C1481 Code - Rear Right Wheel Brake Pressure Control Plausibility Failure
Quick Answer
The Hydraulic Control Unit (HCU) monitors the Rear Right Wheel Brake Pressure. Common causes include Brake System Bleeding, Faulty Hydraulic Control Unit (HCU), Hydraulic Control Unit (HCU) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1481 indicates Rear Right Wheel Brake Pressure Control Plausibility Failure.
- Common causes
- Common causes include Brake System Bleeding, Faulty Hydraulic Control Unit (HCU), Hydraulic Control Unit (HCU) harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1481 Description
What are the Possible Causes of the DTC C1481?
- Brake System Bleeding
- Faulty Hydraulic Control Unit (HCU)
- Hydraulic Control Unit (HCU) harness is open or shorted
- Hydraulic Control Unit (HCU) circuit poor electrical connection
How to Fix the DTC C1481?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1481 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1481 code?
Need more information on how to fix the C1481 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1481 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1481 Chrysler — Rear Differential Position Sensor Circuit 2 Short To Battery
- C1481 Dodge — Rear Differential Position Sensor Circuit 2 Short To Battery
- C1481 Ford — Rear Right Wheel Brake Pressure Control Plausibility Failure
- C1481 Jeep — Rear Differential Position Sensor Circuit 2 Short To Battery
- C1481 Lincoln — Rear Right Wheel Brake Pressure Control Plausibility Failure
- C1481 Mercury — Rear Right Wheel Brake Pressure Control Plausibility Failure
Frequently Asked Questions about C1481 Code
1. What are the common symptoms of OBDII code C1481 (Rear Right Wheel Brake Pressure Control Plausibility Failure)?
The common symptoms include uneven braking, pulling to one side while braking, illuminated ABS or brake warning lights on the dashboard, and potential loss of braking power on the rear right wheel.
2. What can cause OBDII code C1481 to trigger?
Possible causes of this code include a faulty brake pressure sensor, issues with the ABS module, damaged wiring or connectors in the brake system, or a problem with the hydraulic control unit.
3. How serious is the Rear Right Wheel Brake Pressure Control Plausibility Failure code (C1481)?
This code should be taken seriously as it can impact the vehicle's braking performance and overall safety. It is recommended to address the issue promptly to avoid potential brake system failures.
4. How can I diagnose the source of OBDII code C1481?
Diagnosing this code typically involves using a professional OBDII scanner to retrieve the specific fault codes, conducting a visual inspection of the brake system components, and testing the brake pressure sensor and wiring for any faults.
5. Can I continue driving my vehicle with OBDII code C1481 present?
It is not recommended to continue driving the vehicle with this code active, as it may compromise the braking performance on the rear right wheel. It is advisable to have the issue diagnosed and repaired as soon as possible.
6. Are there any DIY repair tips for fixing OBDII code C1481?
DIY repair for this code may include checking and cleaning the connectors and wiring related to the brake system, inspecting the brake pressure sensor for damage, and ensuring the hydraulic control unit is functioning correctly. However, professional repair is recommended for accurate diagnosis and safe resolution.
7. What is the typical cost to repair OBDII code C1481?
The cost of repairing this code can vary depending on the underlying cause. It may range from a few hundred dollars for sensor replacement to over a thousand dollars if the ABS module or hydraulic control unit needs to be replaced.
8. Can weather conditions affect the triggering of OBDII code C1481?
Extreme weather conditions, such as heavy rain or snow, can potentially worsen the symptoms associated with this code due to the additional stress placed on the brake system. It is important to drive cautiously and address any brake-related issues promptly.
9. How long does it take to repair OBDII code C1481?
The repair time for this code can vary based on the specific cause and complexity of the issue. Simple fixes like sensor replacement may take a few hours, while more involved repairs could require a day or more, especially if parts need to be ordered.
10. Is it necessary to reset the OBDII system after repairing code C1481?
Yes, it is recommended to clear the OBDII system after repairing this code to reset the fault codes and ensure that the issue has been resolved. This can be done using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
Discuss the causes and fixes for C1481 OBDII Code
Code C1481 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
