C1472 Scion Code - Acceleration Sensor
Quick Answer
The Skid Control ECU receives signals from the Yaw Rate and Acceleration Sensor (for separate type) or Yaw Rate and Acceleration Sensor (airbag sensor assembly) (for built-in type) via the CAN communication system. Common causes include Faulty Yaw Rate and Acceleration Sensor, Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1472 Scion indicates Acceleration Sensor.
- Common causes
- Common causes include Faulty Yaw Rate and Acceleration Sensor, Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1472 Scion Description
What are the Possible Causes of the DTC C1472 Scion?
- Faulty Yaw Rate and Acceleration Sensor
- Yaw Rate and Acceleration Sensor harness is open or shorted
- Yaw Rate and Acceleration Sensor circuit poor electrical connection
How to Fix the DTC C1472 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1472 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1472 Scion code?
Need more information on how to fix the C1472 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1472 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1472 Scion Code
1. What does the OBDII code C1472 mean for a Scion?
C1472 indicates a problem with the acceleration sensor, which is responsible for detecting the vehicle's acceleration and deceleration to assist systems like traction control and stability control.
2. What are the common symptoms of the C1472 code in a Scion?
Symptoms may include the traction control or stability control warning light turning on, reduced performance of traction or stability systems, and erratic vehicle handling.
3. What causes the C1472 code to appear?
Possible causes include a faulty acceleration sensor, damaged sensor wiring or connector, physical damage to the sensor mounting, or a malfunction in the electronic control unit (ECU).
4. Can I drive my Scion with the C1472 code active?
While the vehicle may still be drivable, the traction control and stability assist systems may not function properly, increasing the risk of losing control in certain driving conditions.
5. How do you diagnose the C1472 code in a Scion?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the acceleration sensor and its wiring for damage or loose connections, and testing the sensor’s output with a multimeter.
6. How do you fix the C1472 code in a Scion?
Repairs may include replacing the faulty acceleration sensor, repairing damaged wiring or connectors, or recalibrating the sensor using specialized diagnostic equipment.
7. Does the acceleration sensor need to be calibrated after replacement?
Yes, in most cases, the acceleration sensor requires calibration after replacement to ensure proper operation within the vehicle’s systems.
8. How much does it cost to repair the C1472 code in a Scion?
The cost can range from $150 to $500 depending on whether the issue is with the sensor itself, the wiring, or the need for professional calibration.
9. Can a dead battery cause the C1472 code to appear?
A weak or dead battery can sometimes cause a temporary loss of calibration or sensor errors, but the issue should be resolved if the battery is replaced or recharged.
10. What systems are affected when the C1472 code is triggered?
The traction control system (TCS), electronic stability control (ESC), and anti-lock braking system (ABS) may be affected, leading to reduced functionality or warning lights on the dashboard.
Discuss the causes and fixes for C1472 Scion OBDII Code
Code C1472 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
