C1468 Toyota Code - SFR Solenoid Circuit
Quick Answer
The SFR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1468 Toyota indicates SFR Solenoid Circuit.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1468 Toyota Description
What are the Possible Causes of the DTC C1468 Toyota?
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1468 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1468 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1468 Toyota code?
Need more information on how to fix the C1468 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1468 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- C1468 2013 Toyota RAV4 — SFR Solenoid Circuit
- C1468 2014 Toyota RAV4 — SFR Solenoid Circuit
- C1468 2015 Toyota RAV4 — SFR Solenoid Circuit
- C1468 2016 Toyota RAV4 — SFR Solenoid Circuit
- C1468 2017 Toyota RAV4 — SFR Solenoid Circuit
- C1468 2018 Toyota RAV4 — SFR Solenoid Circuit
Frequently Asked Questions about C1468 Toyota Code
1. What does the OBDII code C1468 mean on a Toyota?
C1468 indicates an issue with the SFR (Right Front Solenoid) Circuit in the vehicle's ABS (Anti-lock Braking System), signaling a potential malfunction in the solenoid or its circuitry.
2. What are the common symptoms of code C1468 on a Toyota?
Symptoms may include the ABS warning light illuminating, reduced braking efficiency, or the ABS system failing to function properly.
3. What causes the C1468 code to appear on a Toyota?
Common causes include a faulty SFR solenoid, damaged wiring or connectors in the solenoid circuit, corrosion, or a malfunctioning ABS control module.
4. Can I drive my Toyota with the C1468 code?
While the vehicle may still be drivable, the ABS system may not function correctly, increasing the risk of wheel lockup during hard braking. It’s best to address the issue promptly.
5. How do I diagnose the C1468 code on a Toyota?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the wiring and connectors for damage, and testing the SFR solenoid and circuit with a multimeter.
6. How do I fix the C1468 code on a Toyota?
Repairs may include replacing the SFR solenoid, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing the ABS control module if needed.
7. What tools are required to troubleshoot the C1468 code?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools for accessing and inspecting the ABS components.
8. How much does it cost to fix the C1468 code on a Toyota?
Repair costs vary but can range from $100 to $400 depending on whether the solenoid, wiring, or ABS module needs replacement and the labor involved.
9. Can a dead battery cause the C1468 code on a Toyota?
A weak or dead battery can sometimes cause communication errors in the ABS system, but it’s unlikely to be the sole cause of a solenoid circuit issue.
10. Does the C1468 code require reprogramming the ABS module?
Reprogramming is not typically required unless the ABS control module is replaced. Always follow the manufacturer’s guidelines during repairs.
Discuss the causes and fixes for C1468 Toyota OBDII Code
Code C1468 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
