AutoCodesToyota – C1468 2013 Toyota RAV4

C1468 2013 Toyota RAV4 Code - SFR Solenoid Circuit

Quick Answer

The SFR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1468 2013 Toyota RAV4 indicates SFR Solenoid Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 307
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 18, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1468 2013 Toyota RAV4 Description

The SFR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. The Skid Control ECU (Brake Actuator Assembly) monitors the SFR Solenoid. The Skid Control ECU (Brake Actuator Assembly) sets the Diagnostic Trouble Code (DTC) when the SFR Solenoid is not to factory specifications.
OBDII Code C1468 2013 Toyota RAV4 - SFR Solenoid Circuit - AutoCodes.com
C1468 2013 Toyota RAV4 Code - SFR Solenoid Circuit

What are the Possible Causes of the DTC C1468 2013 Toyota RAV4?

  • Faulty Skid Control ECU (Brake Actuator Assembly)

How to Fix the DTC C1468 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1468 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1468 2013 Toyota RAV4 code?

Need more information on how to fix the C1468 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1468 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1468 2013 Toyota RAV4 Code

What does the OBDII code C1468 mean on a 2013 Toyota RAV4?

The code C1468 indicates an issue with the SFR (Right Front) Solenoid Circuit in the ABS system, which controls braking pressure to the front-right wheel.

What are the common symptoms of code C1468 in a 2013 Toyota RAV4?

Symptoms may include the ABS warning light turning on, reduced braking performance, and possible loss of ABS functionality.

What causes code C1468 in a 2013 Toyota RAV4?

Common causes include a faulty right front solenoid, damaged wiring or connectors in the ABS circuit, or a malfunctioning ABS control module.

Can I still drive my 2013 Toyota RAV4 with code C1468?

Yes, but it’s not recommended as the ABS system may not function properly, increasing the risk of skidding or loss of control during emergency braking.

How do I diagnose code C1468 on a 2013 Toyota RAV4?

Start by checking the wiring and connectors for the right front solenoid, then test the solenoid itself for proper operation, and finally inspect the ABS control module if needed.

How can I fix the C1468 code on my 2013 Toyota RAV4?

Repairs may include replacing the right front solenoid, repairing or replacing damaged wiring or connectors, or reprogramming/replacing the ABS control module.

How much does it cost to fix the C1468 code on a 2013 Toyota RAV4?

Repair costs vary but may range between $200 and $800 depending on whether you need to replace the solenoid, repair wiring, or address ABS control module issues.

Can a dead battery trigger the C1468 code on a 2013 Toyota RAV4?

A dead battery is unlikely to directly cause this code, but low voltage can sometimes lead to ABS system errors. Check the battery and charging system if no other issues are found.

Will clearing the C1468 code with a scanner fix the problem?

Clearing the code will remove it temporarily, but if the underlying issue isn’t addressed, the code will likely return.

Does the C1468 code require ABS module replacement on a 2013 Toyota RAV4?

Not necessarily. The ABS module should only be replaced after confirming it’s faulty and ruling out issues with the solenoid or wiring.

Discuss the causes and fixes for C1468 2013 Toyota RAV4 OBDII Code

Code C1468 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play