AutoCodes – Toyota – C1442 2016 Toyota RAV4

C1442 2016 Toyota RAV4 Code - Invalid Data Received from Acceleration Sensor

Quick Answer

The Airbag Sensor Assembly has a built-in Yaw Rate and Acceleration Sensor. Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1442 2016 Toyota RAV4 indicates Invalid Data Received from Acceleration Sensor.
Common causes: Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 286

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1442 2016 Toyota RAV4 Description

The Airbag Sensor Assembly has a built-in Yaw Rate and Acceleration Sensor. The Skid Control ECU (Brake Actuator Assembly) receives signals from the Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly) via the Controller Area Network (CAN) communication system. The Diagnostic Trouble Code (DTC) will be set when an invalid data signal is transmitted continuously from the Acceleration Sensor for 10 seconds or more.

OBDII Code C1442 2016 Toyota RAV4 - Invalid Data Received from Acceleration Sensor - AutoCodes.com — C1442 2016 Toyota RAV4 Code - Invalid Data Received from Acceleration Sensor

What does this mean?

What are the Possible Causes of the DTC C1442 2016 Toyota RAV4?

Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly)
Yaw Rate and Acceleration Sensor harness is open or shorted
Yaw Rate and Acceleration Sensor circuit poor electrical connection

How to Fix the DTC C1442 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1442 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1442 2016 Toyota RAV4 code?

Need more information on how to fix the C1442 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1442 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1442 2016 Toyota RAV4 Code

1. What are the common symptoms of OBDII code C1442 in a 2016 Toyota RAV4?

- Common symptoms include the vehicle going into limp mode, the Check Engine light being illuminated, and potential issues with the vehicle's acceleration.

2. What does the OBDII code C1442 for a 2016 Toyota RAV4 mean?

- The code C1442 indicates that the Engine Control Module (ECM) has detected invalid data from the acceleration sensor.

3. What are the potential causes of OBDII code C1442 in a 2016 Toyota RAV4?

- Possible causes include a faulty acceleration sensor, damaged wiring or connectors related to the sensor, or issues with the ECM itself.

4. How can I diagnose the OBDII code C1442 in my 2016 Toyota RAV4?

- Diagnosis involves using a scan tool to read the code, checking the wiring and connectors of the acceleration sensor, and testing the sensor's functionality.

5. Can I continue driving my 2016 Toyota RAV4 with the OBDII code C1442 present?

- It is not recommended to drive the vehicle with this code as it can affect the vehicle's performance and safety. It's best to address the issue promptly.

6. How can I repair OBDII code C1442 in my 2016 Toyota RAV4?

- Repair typically involves replacing the faulty acceleration sensor, repairing any damaged wiring or connectors, and clearing the code with a scan tool.

7. Is it possible to reset the OBDII code C1442 in a 2016 Toyota RAV4 without fixing the underlying issue?

- While you can clear the code temporarily, it is crucial to address the root cause to prevent the issue from recurring and potentially causing more significant problems.

8. Are there any DIY tips for fixing OBDII code C1442 in a 2016 Toyota RAV4?

- DIY tips include checking for loose or damaged wiring, ensuring proper sensor connections, and consulting the vehicle's repair manual for specific instructions.

9. How much does it typically cost to repair OBDII code C1442 in a 2016 Toyota RAV4?

- The cost can vary depending on the labor rates and the price of the replacement sensor. However, expect to pay a few hundred dollars for parts and labor.

10. Can a mechanic help me with diagnosing and repairing OBDII code C1442 in my 2016 Toyota RAV4?

- Yes, a qualified mechanic with experience in diagnosing and repairing OBDII codes can help identify the issue, replace the faulty components, and clear the code for you.