C1432 Scion Code - Steering Angle Sensor Power Source Voltage Malfunction
Quick Answer
The Steering Angle Sensor signals are sent to the Skid Control ECU (Brake Actuator Assembly) via the Control Area Network (CAN) communication system. Common causes include Faulty Steering Angle Sensor (Spiral Cable), Steering Angle Sensor power supply, Steering Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1432 Scion indicates Steering Angle Sensor Power Source Voltage Malfunction.
- Common causes
- Common causes include Faulty Steering Angle Sensor (Spiral Cable), Steering Angle Sensor power supply, Steering Angle Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1432 Scion Description
What are the Possible Causes of the DTC C1432 Scion?
- Faulty Steering Angle Sensor (Spiral Cable)
- Steering Angle Sensor power supply
- Steering Angle Sensor harness is open or shorted
- Steering Angle Sensor circuit poor electrical connection
How to Fix the DTC C1432 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1432 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1432 Scion code?
Need more information on how to fix the C1432 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1432 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1432 Scion Code
1. What does OBDII code C1432 mean in a Scion vehicle?
Code C1432 indicates a Steering Angle Sensor Power Source Voltage Malfunction, meaning there’s an issue with the electrical supply to the steering angle sensor.
2. What are the common symptoms of code C1432 in a Scion?
Symptoms may include the ABS or traction control warning lights turning on, loss of stability control, and inaccurate steering angle readings.
3. What causes code C1432 to trigger in a Scion?
Common causes include a faulty steering angle sensor, damaged wiring or connectors, a blown fuse, or issues with the vehicle’s power supply to the sensor.
4. Can I still drive my Scion with code C1432 active?
While the vehicle may be drivable, safety features like stability control and ABS may not work properly, so it’s best to address the issue promptly.
5. How is code C1432 diagnosed in a Scion?
A technician will use an OBDII scanner to confirm the code, inspect the wiring and connectors, check for blown fuses, and test the steering angle sensor for proper function.
6. What repairs are typically needed for code C1432 in a Scion?
Repairs may include replacing a damaged steering angle sensor, repairing or replacing faulty wiring or connectors, or replacing a blown fuse.
7. Can resetting the code fix C1432 in a Scion?
Resetting the code without addressing the underlying issue is not a permanent fix; the code will likely return until the problem is resolved.
8. How much does it cost to fix code C1432 in a Scion?
Repair costs can vary but may range from $100 to $500 depending on whether the steering angle sensor, wiring, or other components need replacement.
9. Can a weak battery cause code C1432 in a Scion?
Yes, a weak or failing battery can result in low voltage to the steering angle sensor, triggering this code.
10. Is code C1432 related to the vehicle’s alignment?
No, this code specifically pertains to the electrical power supply to the steering angle sensor, not the physical alignment of the wheels.
Discuss the causes and fixes for C1432 Scion OBDII Code
Code C1432 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
