C1401 Jeep Code - Transfer Case Range Select Switch Circuit Low
Quick Answer
The Final Drive Control Module monitors the Transfer Case Range Select Switch. Common causes include Faulty Transfer Case Range Select Switch, Transfer Case Range Select Switch harness is open or shorted, Transfer Case Range Select Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1401 Jeep indicates Transfer Case Range Select Switch Circuit Low.
- Common causes
- Common causes include Faulty Transfer Case Range Select Switch, Transfer Case Range Select Switch harness is open or shorted, Transfer Case Range Select Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1401 Jeep Description
What are the Possible Causes of the DTC C1401 Jeep?
- Faulty Transfer Case Range Select Switch
- Transfer Case Range Select Switch harness is open or shorted
- Transfer Case Range Select Switch circuit poor electrical connection
- Faulty Instrument Cluster
- Faulty Final Drive Control Module
How to Fix the DTC C1401 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1401 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1401 Jeep code?
Need more information on how to fix the C1401 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1401 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1401 Jeep Code
1. What are the common symptoms of OBDII code C1401 in a Jeep related to the Transfer Case Range Select Switch Circuit Low?
- Common symptoms include difficulty shifting gears in the transfer case, an illuminated 4WD indicator light, and possible limited functionality of the 4WD system.
2. What are the possible causes of the Transfer Case Range Select Switch Circuit Low error code (C1401) in a Jeep?
- Potential causes may include a malfunctioning transfer case range select switch, damaged wiring or connectors in the circuit, or a faulty control module.
3. How can I diagnose the Transfer Case Range Select Switch Circuit Low issue in my Jeep?
- Diagnostic steps may involve checking the wiring and connectors for damage, testing the transfer case range select switch for proper functionality, and using a scan tool to read the error code and confirm the issue.
4. Is it safe to continue driving my Jeep with the C1401 code related to the Transfer Case Range Select Switch Circuit Low?
- It is generally not recommended to drive the vehicle with this error code as it can affect the proper operation of the 4WD system, potentially leading to safety concerns or further damage.
5. Can I reset the C1401 code related to the Transfer Case Range Select Switch Circuit Low in my Jeep on my own?
- While you can clear the error code using an OBDII scanner, it is important to diagnose and address the underlying issue causing the code to prevent it from reoccurring.
6. How much does it typically cost to repair the Transfer Case Range Select Switch Circuit Low problem in a Jeep?
- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the transfer case range select switch, repairing damaged wiring, or reprogramming the control module. Costs can range from $100 to $500 or more.
7. Are there any DIY tips for troubleshooting the C1401 code in a Jeep related to the Transfer Case Range Select Switch Circuit Low?
- DIY tips may include visually inspecting the wiring for any visible damage, checking and testing the transfer case range select switch for continuity, and ensuring all connections are secure.
8. Does the C1401 error code related to the Transfer Case Range Select Switch Circuit Low affect the overall drivability of the Jeep?
- While the vehicle may still be driveable with this error code, it is important to address the issue promptly to prevent potential drivability issues and ensure the proper functioning of the 4WD system.
9. Can extreme weather conditions or off-road driving cause the C1401 code in a Jeep related to the Transfer Case Range Select Switch Circuit Low?
- Yes, extreme weather conditions or off-road driving can potentially expose the transfer case range select switch to damage, leading to the triggering of the C1401 error code.
10. How long does it typically take to repair the Transfer Case Range Select Switch Circuit Low issue in a Jeep?
- The repair time can vary depending on the complexity of the issue and the availability of parts. In general, it may take a few hours to a full day to diagnose and repair the problem.
Discuss the causes and fixes for C1401 Jeep OBDII Code
Code C1401 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
