AutoCodes – Toyota – C1361 2017 Toyota RAV4

C1361 2017 Toyota RAV4 Code - Short Circuit in ABS Motor Fail Safe Relay Circuit

Quick Answer

The Motor Relay supplies power to the pump motor. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1361 2017 Toyota RAV4 indicates Short Circuit in ABS Motor Fail Safe Relay Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 177
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 23, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C1361 2017 Toyota RAV4 Description

The Motor Relay supplies power to the pump motor. While the Anti-Lock Brake System (ABS) is activated, the Skid Control ECU (Brake Actuator Assembly) turns the Motor Relay ON and operates the pump motor. If the voltage supplied to the Motor Relay is below the Diagnostic Trouble Code (DTC) detection threshold due to low voltage from the battery or generator, the DTC may be stored. The Motor Relay is part of the Skid Control ECU (Brake Actuator Assembly).
OBDII Code C1361 2017 Toyota RAV4 - Short Circuit in ABS Motor Fail Safe Relay Circuit - AutoCodes.com
C1361 2017 Toyota RAV4 Code - Short Circuit in ABS Motor Fail Safe Relay Circuit

What are the Possible Causes of the DTC C1361 2017 Toyota RAV4?

  • Faulty Skid Control ECU (Brake Actuator Assembly)
  • Skid Control ECU harness is open or shorted
  • Skid Control ECU circuit poor electrical connection

How to Fix the DTC C1361 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1361 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1361 2017 Toyota RAV4 code?

Need more information on how to fix the C1361 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1361 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1361 2017 Toyota RAV4 Code

1. What does OBDII code C1361 mean on a 2017 Toyota RAV4?

C1361 indicates a short circuit in the ABS motor fail-safe relay circuit, which affects the anti-lock braking system's operation.

2. What are the common symptoms of code C1361 in a 2017 Toyota RAV4?

Symptoms may include the ABS warning light being illuminated, reduced or no ABS functionality, and potential loss of traction control.

3. What causes the C1361 code to appear in a Toyota RAV4?

Common causes include damaged wiring, a short circuit in the ABS motor relay circuit, a faulty ABS motor fail-safe relay, or a malfunctioning ABS module.

4. Can I still drive my 2017 Toyota RAV4 with the C1361 code?

While the vehicle may still be drivable, the ABS system may not function properly, increasing the risk of wheel lock-up during hard braking or slippery conditions.

5. How do I diagnose the C1361 code in my Toyota RAV4?

Start by inspecting the wiring and connectors in the ABS motor fail-safe relay circuit for damage or corrosion. Use a multimeter to test for shorts or open circuits, and check the relay's functionality.

6. How can I fix the C1361 code on my 2017 Toyota RAV4?

Repairs might involve replacing the ABS motor fail-safe relay, repairing damaged wiring, or replacing the ABS control module if it's found to be defective.

7. How much does it cost to fix the C1361 code on a Toyota RAV4?

Repair costs can vary depending on the issue, ranging from $50 for wiring repairs to $800 or more if the ABS control module needs replacement.

8. Can a weak battery cause the C1361 code to appear?

While uncommon, a weak or failing battery can sometimes cause electrical issues that may trigger ABS-related codes, including C1361.

9. Do I need to reset the code after fixing the C1361 problem?

Yes, after completing the repair, clear the code using an OBDII scanner. If the issue is resolved, the code should not return.

10. Is the C1361 code a common issue in the 2017 Toyota RAV4?

No, this code is not particularly common, but it can occur due to electrical problems or relay failures in the ABS system.

Discuss the causes and fixes for C1361 2017 Toyota RAV4 OBDII Code

Code C1361 2017 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play