C1354 Code - Increasing Pressure Solenoid Malfunction Rear Right
Quick Answer
Each solenoid adjusts pressure which affects each wheel cylinder according to signals from the Skid Control Electronic Control Unit (ECU) and controls the vehicle. Common causes include Faulty Brake Actuator Assembly, Faulty Skid Control Electronic Control Unit (ECU), Skid Control ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1354 indicates Increasing Pressure Solenoid Malfunction Rear Right.
- Common causes
- Common causes include Faulty Brake Actuator Assembly, Faulty Skid Control Electronic Control Unit (ECU), Skid Control ECU harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1354 Description
What are the Possible Causes of the DTC C1354?
- Faulty Brake Actuator Assembly
- Faulty Skid Control Electronic Control Unit (ECU)
- Skid Control ECU harness is open or shorted
- Skid Control ECU circuit poor electrical connection
How to Fix the DTC C1354?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1354 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1354 code?
Need more information on how to fix the C1354 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1354 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1354 Hyundai — Sensor 4 LFI Open/Short Failure
- C1354 KIA — Sensor 4 LFI Open/Short Failure
- C1354 Lexus — Increasing Pressure Solenoid Malfunction Rear Right
- C1354 Nissan — Increasing Pressure Solenoid Malfunction Rear Right
- C1354 Toyota — Increasing Pressure Solenoid Malfunction Rear Right
Frequently Asked Questions about C1354 Code
1. What are the common symptoms of OBDII code C1354 (Increasing Pressure Solenoid Malfunction Rear Right)?
- Common symptoms include issues with braking performance, such as increased brake pedal effort, uneven braking, or vehicle instability during braking.
2. What can cause OBDII code C1354 to trigger?
- The code may trigger due to a malfunction in the increasing pressure solenoid located in the rear right brake system, which can be caused by electrical faults, wiring issues, or a defective solenoid.
3. How serious is the Increasing Pressure Solenoid Malfunction Rear Right issue?
- This issue should be addressed promptly, as it can affect the proper functioning of the rear right brake system, potentially leading to safety concerns and compromised braking performance.
4. Can I continue driving with OBDII code C1354 present?
- It is not recommended to continue driving with this code present, as it can impact the braking system's effectiveness and safety. It is advisable to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose OBDII code C1354 at home?
- While it is recommended to have a professional diagnose the specific cause of the code, you can start by checking the wiring and connections related to the increasing pressure solenoid and inspecting the solenoid itself for any visible damage.
6. What are some repair tips for OBDII code C1354?
- Repair tips may include checking and repairing any damaged wiring, replacing the increasing pressure solenoid in the rear right brake system if necessary, and clearing the code with an OBDII scanner after the repairs.
7. Can a DIY enthusiast fix OBDII code C1354 on their own?
- Depending on their level of expertise, a DIY enthusiast may be able to address simpler causes of the code, such as checking and cleaning connections or replacing the solenoid. For more complex issues, it is recommended to seek professional help.
8. How much does it typically cost to repair OBDII code C1354?
- The cost of repairing this code can vary depending on the underlying cause and the specific parts that need to be replaced. It is advisable to obtain quotes from local mechanics or repair shops to get an accurate estimate.
9. Is it necessary to reset the OBDII code C1354 after making repairs?
- Yes, it is essential to reset the code using an OBDII scanner after making any repairs to clear the error code from the system and ensure that the issue has been resolved.
10. What should I do if OBDII code C1354 keeps coming back after repairs?
- If the code keeps returning after repairs have been made, it may indicate that the root cause of the issue has not been fully addressed. In such cases, it is recommended to have a professional mechanic perform a more thorough diagnosis to identify and resolve the underlying problem.
Discuss the causes and fixes for C1354 OBDII Code
Code C1354 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
