C1353 Code - Increasing Pressure Solenoid Malfunction Front Left
Quick Answer
Each solenoid adjusts pressure which affects each wheel cylinder according to signals from the Skid Control Electronic Control Unit (ECU) and controls the vehicle. Common causes include Faulty Brake Actuator Assembly, Faulty Skid Control Electronic Control Unit (ECU), Skid Control ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1353 indicates Increasing Pressure Solenoid Malfunction Front Left.
- Common causes
- Common causes include Faulty Brake Actuator Assembly, Faulty Skid Control Electronic Control Unit (ECU), Skid Control ECU harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1353 Description
What are the Possible Causes of the DTC C1353?
- Faulty Brake Actuator Assembly
- Faulty Skid Control Electronic Control Unit (ECU)
- Skid Control ECU harness is open or shorted
- Skid Control ECU circuit poor electrical connection
How to Fix the DTC C1353?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1353 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1353 code?
Need more information on how to fix the C1353 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1353 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1353 Hyundai — Sensor 3 LFI Open/Short Failure
- C1353 KIA — Sensor 3 LFI Open/Short Failure
- C1353 Lexus — Increasing Pressure Solenoid Malfunction Front Left
- C1353 Nissan — Increasing Pressure Solenoid Malfunction Front Left
- C1353 Toyota — Increasing Pressure Solenoid Malfunction Front Left
Frequently Asked Questions about C1353 Code
1. What are the common symptoms of OBDII code C1353 (Increasing Pressure Solenoid Malfunction Front Left)?
The common symptoms of this code include issues with the vehicle's braking system, such as decreased braking performance or uneven braking on the front left side.
2. What are possible causes of OBDII code C1353?
Potential causes of this code may include a faulty increasing pressure solenoid on the front left side, damaged wiring or connectors related to the solenoid, or issues with the electronic brake control module.
3. How can I diagnose OBDII code C1353?
Diagnosing this code typically involves using a diagnostic scan tool to retrieve the code and then conducting a thorough inspection of the front left increasing pressure solenoid, its wiring, and related components to identify any issues.
4. Can I still drive my vehicle with OBDII code C1353?
It is not recommended to drive the vehicle with this code present, as it can affect the braking performance and compromise safety. It is best to address the issue promptly.
5. How can I repair OBDII code C1353?
Repairing this code may involve replacing the front left increasing pressure solenoid, repairing or replacing damaged wiring or connectors, or addressing any underlying issues with the electronic brake control module.
6. Is it safe to reset the OBDII code C1353 without fixing the issue?
Resetting the code without addressing the underlying issue may temporarily clear the warning light, but the problem will likely reoccur. It is important to diagnose and repair the issue to ensure proper functioning of the braking system.
7. How much does it cost to repair OBDII code C1353?
The cost of repairing this code can vary depending on the specific issue causing it, the labor rates in your area, and the cost of parts needed for the repair. It is recommended to obtain quotes from reputable auto repair shops.
8. Can a DIY enthusiast fix OBDII code C1353 at home?
DIY enthusiasts with the necessary tools and knowledge of automotive systems may be able to diagnose and repair this code at home. However, working on the braking system requires caution and expertise, so it is essential to proceed carefully.
9. What other components should I inspect when dealing with OBDII code C1353?
When addressing this code, it is advisable to inspect other components of the braking system, including the brake pads, calipers, and brake lines, to ensure optimal performance and safety.
10. How often does OBDII code C1353 occur in vehicles?
The occurrence of this code can vary among different vehicle models and years. However, issues with increasing pressure solenoids in the braking system can be encountered in some vehicles over time.
Discuss the causes and fixes for C1353 OBDII Code
Code C1353 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
