AutoCodes – KIA – C1333 KIA

C1333 KIA Code - Sensor 2 Fault

Quick Answer

The TPMS Receiver Module monitors the TPMS sensor. Common causes include Damage TPMS sensor 2, Faulty TPMS sensor 2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1333 KIA indicates Sensor 2 Fault.
Common causes: Common causes include Damage TPMS sensor 2, Faulty TPMS sensor 2.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,770

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1333 KIA Description

The TPMS Receiver Module monitors the TPMS sensor. The TPMS Receiver Module sets the OBDII code when it detects that the sensor has an internal fault. The most likely cause is the sensor failure.

OBDII Code C1333 KIA - Sensor 2 Fault - AutoCodes.com — C1333 KIA Code - Sensor 2 Fault

What does this mean?

What are the Possible Causes of the DTC C1333 KIA?

Damage TPMS sensor 2
Faulty TPMS sensor 2

How to Fix the DTC C1333 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1333 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1333 KIA code?

Need more information on how to fix the C1333 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1333 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1333 KIA Code

1. What are common symptoms associated with OBDII code C1333 in a KIA, indicating Sensor 2 Fault?

- Common symptoms include poor engine performance, reduced fuel efficiency, and an illuminated check engine light.

2. What could be the potential causes of OBDII code C1333 in a KIA, indicating Sensor 2 Fault?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust system leaks, or issues with the engine control module.

3. How can I diagnose the Sensor 2 Fault related to OBDII code C1333 in my KIA?

- Diagnosis involves using a diagnostic scanner to retrieve the specific fault code, inspecting the oxygen sensor and related components for damage, and checking for any exhaust leaks.

4. Can I continue driving my KIA with OBDII code C1333 related to Sensor 2 Fault?

- It is not recommended to ignore this fault code, as it can lead to further damage to the engine and emissions system. It is advised to address the issue promptly.

5. What are some repair tips for fixing OBDII code C1333 related to Sensor 2 Fault in a KIA?

- Repair tips include replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, fixing exhaust leaks, and clearing the fault code with a diagnostic scanner.

6. How much does it typically cost to repair OBDII code C1333 related to Sensor 2 Fault in a KIA?

- The cost of repair can vary depending on the exact cause of the fault, but it may range from a few hundred dollars to over a thousand dollars, including parts and labor.

7. Is it possible to reset the check engine light after repairing OBDII code C1333 related to Sensor 2 Fault in a KIA?

- Yes, the check engine light can be reset with a diagnostic scanner after the repair has been completed successfully to clear the fault code.

8. Can a DIY enthusiast fix OBDII code C1333 related to Sensor 2 Fault in a KIA?

- While some aspects of the repair may be DIY-friendly, diagnosing and fixing issues related to the oxygen sensor and engine control system may require professional expertise.

9. How often does OBDII code C1333 related to Sensor 2 Fault occur in KIA vehicles?

- The occurrence of this fault code can vary, but it is not an uncommon issue in KIA vehicles, especially as they age and components wear out.

10. Are there any preventive maintenance measures to avoid OBDII code C1333 related to Sensor 2 Fault in a KIA?

- Regular maintenance, such as replacing oxygen sensors at recommended intervals, inspecting exhaust system components, and addressing engine performance issues promptly, can help prevent this fault code from occurring.