C1319 KIA Code - Sensor 3 Wrong Type Installed
Quick Answer
The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 3, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1319 KIA indicates Sensor 3 Wrong Type Installed.
- Common causes
- Common causes include Faulty TPMS Sensor 3, Faulty TPM Receiver Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1319 KIA Description
What are the Possible Causes of the DTC C1319 KIA?
- Faulty TPMS Sensor 3
- Faulty TPM Receiver Module
How to Fix the DTC C1319 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1319 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1319 KIA code?
Need more information on how to fix the C1319 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1319 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1319 KIA Code
1. What does the OBDII code C1319 mean on a Kia?
C1319 indicates that Sensor 3, typically part of the vehicle's stability control or ABS system, is of the wrong type or incompatible with the system.
2. What are the common symptoms of code C1319 in a Kia?
Symptoms may include the ABS or traction control warning light illuminating, reduced stability control functionality, or inconsistent braking performance.
3. What causes the C1319 code on a Kia?
The most common causes are an incorrect or incompatible sensor being installed, a faulty sensor, or improper calibration of the sensor.
4. How can I fix the C1319 code on my Kia?
Ensure that the correct sensor type is installed based on the manufacturer's specifications. If the sensor is correct but still triggering the code, it may need to be recalibrated or replaced.
5. Can I drive with the C1319 code active on my Kia?
While the vehicle may still be drivable, safety features like ABS or traction control may be compromised, so it’s recommended to address the issue promptly.
6. How can I identify the correct sensor type for my Kia?
Refer to the vehicle’s service manual or consult with a Kia dealership or qualified technician to verify the correct part number and specifications for Sensor 3.
7. Will clearing the C1319 code fix the problem?
Clearing the code may temporarily remove the warning light, but if the underlying issue is not resolved, the code will likely return.
8. Can a damaged wiring harness cause the C1319 code in a Kia?
Yes, damaged or corroded wiring connected to Sensor 3 can lead to communication errors and trigger the C1319 code.
9. Is C1319 related to the ABS system in my Kia?
Yes, C1319 is often associated with the ABS or traction control system, as Sensor 3 plays a role in these safety features.
10. How much does it cost to fix the C1319 code on a Kia?
The cost depends on whether the issue is a sensor replacement, recalibration, or wiring repair. On average, repairs can range from $100 to $300.
Discuss the causes and fixes for C1319 KIA OBDII Code
Code C1319 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
