AutoCodes – Hyundai – C1319 Hyundai

C1319 Hyundai Code - Sensor 3 Wrong Type Installed

Quick Answer

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 3, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1319 Hyundai indicates Sensor 3 Wrong Type Installed.
Common causes: Common causes include Faulty TPMS Sensor 3, Faulty TPM Receiver Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,725

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1319 Hyundai Description

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. The TPM Receiver Module sets the OBDII code when the TPMS Sensor is not to factory specifications. This DTC indicates that the sensor has either failed to learn OR has successfully learned and the receiver did not receive messages from the learned sensor for 12 minutes.

OBDII Code C1319 Hyundai - Sensor 3 Wrong Type Installed - AutoCodes.com — C1319 Hyundai Code - Sensor 3 Wrong Type Installed

What does this mean?

What are the Possible Causes of the DTC C1319 Hyundai?

Faulty TPMS Sensor 3
Faulty TPM Receiver Module

How to Fix the DTC C1319 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1319 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1319 Hyundai code?

Need more information on how to fix the C1319 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1319 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1319 Hyundai Code

What are common symptoms of OBDII code C1319 in a Hyundai related to "Sensor 3 Wrong Type Installed"?

- Common symptoms include issues with the vehicle's stability control system, traction control system, and potential illumination of the ABS warning light on the dashboard.

What could cause the OBDII code C1319 in a Hyundai indicating "Sensor 3 Wrong Type Installed"?

- The code C1319 can be triggered when the electronic control unit (ECU) detects that the incorrect type of sensor has been installed in the third position of the vehicle's wheel speed sensor system.

How can I diagnose the OBDII code C1319 in a Hyundai for "Sensor 3 Wrong Type Installed"?

- Diagnosis involves using a diagnostic scanner to read the code, checking the specific wheel speed sensor locations, and verifying the sensor types installed in each position.

What is the repair procedure for OBDII code C1319 in a Hyundai indicating "Sensor 3 Wrong Type Installed"?

- The repair typically involves identifying the incorrect sensor, removing it, and replacing it with the correct sensor type specified for the third position in the wheel speed sensor system.

Is it safe to continue driving my Hyundai with the OBDII code C1319 related to "Sensor 3 Wrong Type Installed"?

- It is recommended to address this issue promptly to ensure the proper functioning of the vehicle's stability control and traction control systems. Continuing to drive with this error unresolved may compromise safety.

Can I reset the OBDII code C1319 in a Hyundai myself after fixing the "Sensor 3 Wrong Type Installed" issue?

- Yes, once the correct sensor is installed, the code can be cleared using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes to reset the ECU.

What are the potential risks of ignoring the OBDII code C1319 in a Hyundai related to "Sensor 3 Wrong Type Installed"?

- Ignoring this error can lead to impaired stability control, traction control, and ABS functionality, potentially compromising the vehicle's safety and handling on the road.

Are there different sensor types for the wheel speed sensors in a Hyundai that can trigger the OBDII code C1319 for "Sensor 3 Wrong Type Installed"?

- Yes, different Hyundai models may require specific sensor types for each wheel speed sensor position, and installing the wrong type can trigger the C1319 error code.

How can I prevent the OBDII code C1319 from occurring in my Hyundai due to "Sensor 3 Wrong Type Installed" in the future?

- To prevent this issue, always ensure that the correct sensor types are used when replacing wheel speed sensors in your Hyundai, and follow manufacturer guidelines for sensor compatibility.