C1300 Ford Code - ABS Hydraulic Pump Motor Circuit Failure
Quick Answer
The operating voltage required to run the hydraulic pump motor is between 10 and 16 volts. Common causes include Faulty Hydraulic Control Unit (HCU), Hydraulic Control Unit (HCU) harness is open or shorted, Hydraulic Control Unit (HCU) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1300 Ford indicates ABS Hydraulic Pump Motor Circuit Failure.
- Common causes
- Common causes include Faulty Hydraulic Control Unit (HCU), Hydraulic Control Unit (HCU) harness is open or shorted, Hydraulic Control Unit (HCU) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1300 Ford Description
What are the Possible Causes of the DTC C1300 Ford?
- Faulty Hydraulic Control Unit (HCU)
- Hydraulic Control Unit (HCU) harness is open or shorted
- Hydraulic Control Unit (HCU) circuit poor electrical connection
How to Fix the DTC C1300 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1300 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1300 Ford code?
Need more information on how to fix the C1300 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1300 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1300 Ford Code
1. What are the common symptoms of OBDII code C1300 Ford (ABS Hydraulic Pump Motor Circuit Failure)?
- Common symptoms include the ABS warning light illuminating on the dashboard, loss of ABS functionality, and potential issues with braking performance.
2. What are the possible causes of OBDII code C1300 Ford?
- The code C1300 Ford can be caused by a faulty ABS hydraulic pump motor, damaged wiring or connectors in the circuit, or issues with the ABS control module.
3. How can I diagnose OBDII code C1300 Ford?
- Diagnosing the code typically involves using a scan tool to retrieve the specific fault codes, checking the ABS system components for physical damage, and testing the electrical connections in the hydraulic pump motor circuit.
4. Can I still drive my vehicle with OBDII code C1300 Ford present?
- It is not recommended to drive the vehicle with the ABS warning light on, as it indicates a potential issue with the anti-lock braking system that could compromise safety.
5. How can I repair OBDII code C1300 Ford?
- Repairing this code may involve replacing the ABS hydraulic pump motor, repairing damaged wiring or connectors, or recalibrating the ABS control module.
6. Are there any DIY tips for troubleshooting OBDII code C1300 Ford?
- DIY tips include checking for visible damage to the ABS system components, ensuring proper electrical connections, and consulting the vehicle's service manual for specific troubleshooting steps.
7. Is it safe to reset the OBDII code C1300 Ford without fixing the underlying issue?
- It is not recommended to simply reset the code without addressing the root cause, as the problem may persist and potentially compromise the vehicle's safety.
8. Can extreme weather conditions cause OBDII code C1300 Ford to trigger?
- Yes, extreme weather conditions such as excessive heat or moisture can affect the ABS system components and potentially trigger the code C1300 Ford.
9. How much does it typically cost to repair OBDII code C1300 Ford at a mechanic?
- The cost of repairing this code can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Will OBDII code C1300 Ford cause my vehicle to fail a state emissions inspection?
- The ABS Hydraulic Pump Motor Circuit Failure code itself may not directly impact emissions, but it is important to address the underlying issue to ensure the vehicle is in proper working condition for inspection.
Discuss the causes and fixes for C1300 Ford OBDII Code
Code C1300 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
