C1299 2014 Toyota RAV4 Code - Cancellation of 4WD Control
Quick Answer
If wheel slip continues, differential control will be disabled when the torque-distribution ratio of the differential clutch exceeds the set value and a malfunction in the output of the wheel speed sensors, etc. Common causes include Tire size or tire pressure of the front or rear tires different, Faulty Suspension and ball joint, Faulty Drive shaft. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1299 2014 Toyota RAV4 indicates Cancellation of 4WD Control.
- Common causes
- Common causes include Tire size or tire pressure of the front or rear tires different, Faulty Suspension and ball joint, Faulty Drive shaft.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1299 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC C1299 2014 Toyota RAV4?
- Tire size or tire pressure of the front or rear tires different
- Faulty Suspension and ball joint
- Faulty Drive shaft
- Faulty Propeller shaft
- Faulty Electromagnetic Coupling
- Faulty 4WD Control ECU
How to Fix the DTC C1299 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1299 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1299 2014 Toyota RAV4 code?
Need more information on how to fix the C1299 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1299 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1299 2014 Toyota RAV4 Code
1. What does the OBDII code C1299 mean on a 2014 Toyota RAV4?
C1299 indicates a "Cancellation of 4WD Control," meaning the vehicle's 4WD system has been disabled due to a detected issue.
2. What are the common symptoms of code C1299 in a Toyota RAV4?
Symptoms may include the 4WD warning light illuminating, reduced traction, and the 4WD system being inoperable.
3. What causes the C1299 code to appear on a 2014 Toyota RAV4?
Common causes include a malfunctioning 4WD control module, faulty wheel speed sensors, wiring issues, or incorrect tire sizes.
4. Can driving with an active C1299 code damage my Toyota RAV4?
Driving is generally safe, but without 4WD functionality, traction and stability may be compromised in slippery conditions.
5. How can I diagnose the C1299 code on my Toyota RAV4?
Diagnose the issue by using a scan tool to check for related codes, inspecting wheel speed sensors, and verifying the integrity of the 4WD system wiring.
6. Is it possible for tire size to cause the C1299 code on a 2014 RAV4?
Yes, mismatched or incorrect tire sizes can cause uneven wheel speeds, triggering the C1299 code.
7. What should I check first when troubleshooting the C1299 code?
Start by inspecting the wheel speed sensors and their wiring for damage or debris, as they are common culprits.
8. How is the C1299 code typically repaired in a Toyota RAV4?
Repairs may involve replacing a faulty 4WD control module, repairing wiring, cleaning or replacing wheel speed sensors, or ensuring all tires are the correct size.
9. How much does it cost to fix the C1299 code on a 2014 Toyota RAV4?
Repair costs vary depending on the issue but typically range from $100 to $500 for diagnostics and part replacement.
10. Can a low battery cause the C1299 code on a Toyota RAV4?
A weak or failing battery can sometimes cause electronic control modules, including the 4WD system, to malfunction and trigger this code.
Discuss the causes and fixes for C1299 2014 Toyota RAV4 OBDII Code
Code C1299 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
