AutoCodes – Scion – C1297 Scion

C1297 Scion Code - Steering Angle Sensor

Quick Answer

The Four-Wheel Drive (4WD) ECU Assembly determines that the vehicle is turning based on the signals sent from the Steering Angle Sensor. Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1297 Scion indicates Steering Angle Sensor.
Common causes: Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 269

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 22, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1297 Scion Description

The Four-Wheel Drive (4WD) ECU Assembly determines that the vehicle is turning based on the signals sent from the Steering Angle Sensor. The Steering Angle Sensor signal is sent to the 4WD ECU Assembly via the CAN communication system. The Diagnostic Trouble Code (DTC) will be set when the voltage of the 4WD ECU Assembly IG terminal is 9.5 V or more, and the Steering Angle Sensor malfunction signal is received.

OBDII Code C1297 Scion - Steering Angle Sensor - AutoCodes.com — C1297 Scion Code - Steering Angle Sensor

What does this mean?

What are the Possible Causes of the DTC C1297 Scion?

Faulty Steering Angle Sensor
Steering Angle Sensor harness is open or shorted
Steering Angle Sensor circuit poor electrical connection
Faulty Four-Wheel Drive (4WD) ECU Assembly

How to Fix the DTC C1297 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1297 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1297 Scion code?

Need more information on how to fix the C1297 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1297 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1297 Scion Code

1. What does OBDII code C1297 mean on a Scion?

C1297 indicates an issue with the Steering Angle Sensor, which is responsible for detecting the steering wheel's position and relaying this information to the vehicle's stability control system.

2. What are the common symptoms of code C1297 in a Scion?

Symptoms may include the traction control or stability control warning light turning on, reduced stability control functionality, or erratic handling during turns.

3. What causes code C1297 to trigger in a Scion?

Common causes include a malfunctioning steering angle sensor, misaligned steering wheel, faulty wiring, or a problem with the vehicle's alignment.

4. Can I drive my Scion with a C1297 code?

Yes, but it is not recommended. The stability control system may not function correctly, increasing the risk of losing control in slippery or emergency conditions.

5. How do I fix code C1297 on a Scion?

The repair may involve recalibrating the steering angle sensor, replacing a faulty sensor, repairing damaged wiring, or performing a wheel alignment.

6. How do you recalibrate the steering angle sensor on a Scion?

Recalibration often requires a diagnostic scan tool capable of resetting the sensor. Follow the tool's instructions to perform the calibration.

7. What tools are needed to diagnose code C1297 in a Scion?

A quality OBDII scanner with ABS and stability control system capabilities is required to read the code and perform calibration or tests.

8. Can an alignment issue cause code C1297 to appear?

Yes, if the steering wheel is misaligned or the alignment is off, the steering angle sensor readings may be incorrect, triggering the code.

9. How much does it cost to repair code C1297 on a Scion?

Repair costs vary but may range from $100 to $300 for recalibration or sensor replacement. Complex issues like wiring repairs or advanced diagnostics may increase costs.

10. Is code C1297 specific to Scion vehicles?

No, code C1297 is a generic OBDII code related to the steering angle sensor and can appear on various vehicle makes and models, though the specifics may vary.