AutoCodes – Toyota – C1297 2018 Toyota RAV4

C1297 2018 Toyota RAV4 Code - Steering Angle Sensor

Quick Answer

The Four-Wheel Drive (4WD) ECU Assembly determines that the vehicle is turning based on the signals sent from the Steering Angle Sensor. Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1297 2018 Toyota RAV4 indicates Steering Angle Sensor.
Common causes
Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 421
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 22, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C1297 2018 Toyota RAV4 Description

The Four-Wheel Drive (4WD) ECU Assembly determines that the vehicle is turning based on the signals sent from the Steering Angle Sensor. The Steering Angle Sensor signal is sent to the 4WD ECU Assembly via the CAN communication system. The Diagnostic Trouble Code (DTC) will be set when the voltage of the 4WD ECU Assembly IG terminal is 9.5 V or more, and the Steering Angle Sensor malfunction signal is received.
OBDII Code C1297 2018 Toyota RAV4 - Steering Angle Sensor - AutoCodes.com
C1297 2018 Toyota RAV4 Code - Steering Angle Sensor

What are the Possible Causes of the DTC C1297 2018 Toyota RAV4?

  • Faulty Steering Angle Sensor
  • Steering Angle Sensor harness is open or shorted
  • Steering Angle Sensor circuit poor electrical connection
  • Faulty Four-Wheel Drive (4WD) ECU Assembly

How to Fix the DTC C1297 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1297 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1297 2018 Toyota RAV4 code?

Need more information on how to fix the C1297 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1297 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1297 2018 Toyota RAV4 Code

What does OBDII code C1297 mean for a 2018 Toyota RAV4?

Code C1297 indicates an issue with the Steering Angle Sensor, which is responsible for monitoring the steering wheel's position and angle.

What are the common symptoms of code C1297 in a 2018 Toyota RAV4?

Typical symptoms include the ABS or traction control warning light illuminating and possible malfunction in stability control systems.

What causes code C1297 to appear in a 2018 Toyota RAV4?

Common causes include a faulty Steering Angle Sensor, wiring issues, or misalignment of the sensor due to steering system repairs.

Can driving with code C1297 cause further issues?

Yes, driving with this code may affect vehicle stability control, traction control, and ABS functionality, potentially compromising safety.

How is code C1297 diagnosed?

A diagnostic scan tool is used to read the code and verify the Steering Angle Sensor's operation. Technicians may also inspect wiring and connections for damage.

Is code C1297 related to alignment issues?

Yes, improper wheel alignment or steering system repairs can lead to miscalibration of the Steering Angle Sensor, triggering the code.

Can code C1297 be fixed without replacing the Steering Angle Sensor?

In some cases, recalibrating the sensor or repairing damaged wiring may resolve the issue without needing replacement.

How is the Steering Angle Sensor recalibrated for a 2018 Toyota RAV4?

Recalibration typically requires a scan tool or diagnostic software capable of resetting and calibrating the sensor to factory settings.

Is code C1297 covered under warranty for a 2018 Toyota RAV4?

Warranty coverage depends on the vehicle's age and mileage. Steering Angle Sensor issues may be covered under powertrain or emissions warranties.

Can I clear code C1297 without fixing the issue?

Clearing the code without addressing the underlying problem may only temporarily remove the warning, and the code is likely to reappear.

Discuss the causes and fixes for C1297 2018 Toyota RAV4 OBDII Code

Code C1297 2018 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play