AutoCodes – Buick – C1295 Buick

C1295 Buick Code - Brake Lamp Switch Circuit Open

Quick Answer

The Electronic Brake Control Module (EBCM) monitors the Brake Lamp Switch. Common causes include Faulty Brake Lamp Switch, Brake Lamp Switch harness is open or shorted, Brake Lamp Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1295 Buick indicates Brake Lamp Switch Circuit Open.
Common causes: Common causes include Faulty Brake Lamp Switch, Brake Lamp Switch harness is open or shorted, Brake Lamp Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,531

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1295 Buick Description

The Electronic Brake Control Module (EBCM) monitors the Brake Lamp Switch. The EBCM sets the OBDII code when the Brake Lamp Switch is not to factory specifications.

OBDII Code C1295 Buick - Brake Lamp Switch Circuit Open - AutoCodes.com — C1295 Buick Code - Brake Lamp Switch Circuit Open

What does this mean?

What are the Possible Causes of the DTC C1295 Buick?

Faulty Brake Lamp Switch
Brake Lamp Switch harness is open or shorted
Brake Lamp Switch circuit poor electrical connection

How to Fix the DTC C1295 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1295 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1295 Buick code?

Need more information on how to fix the C1295 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1295 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1295 Buick Code

1. What are the common symptoms of OBDII code C1295 in a Buick related to the Brake Lamp Switch Circuit Open?

The common symptoms include the brake lights not working, the brake light staying on continuously, and the cruise control not functioning properly.

2. What are the possible causes of the Brake Lamp Switch Circuit Open OBDII code in a Buick?

The code C1295 in a Buick is often caused by a faulty brake lamp switch, a broken or shorted wire in the brake lamp circuit, or a problem with the brake lamp control module.

3. How can I diagnose the Brake Lamp Switch Circuit Open issue in my Buick?

To diagnose the issue, start by checking the brake light bulbs, fuses, and wiring connections. Test the brake lamp switch for continuity and inspect the brake lamp control module for any signs of damage.

4. Can I still drive my Buick with the C1295 OBDII code related to the Brake Lamp Switch Circuit Open?

It is not recommended to drive your Buick with the Brake Lamp Switch Circuit Open code as it can affect the safety of your vehicle by potentially causing rear-end collisions due to malfunctioning brake lights.

5. How can I repair the Brake Lamp Switch Circuit Open issue in my Buick?

Repairing the issue involves replacing the faulty brake lamp switch, repairing or replacing any damaged wiring in the brake lamp circuit, or reprogramming the brake lamp control module if necessary.

6. Is the OBDII code C1295 related to the Brake Lamp Switch Circuit Open a common issue in Buick vehicles?

Yes, the C1295 code related to the Brake Lamp Switch Circuit Open is a common issue in Buick vehicles, especially in models equipped with electronic brake control systems.

7. Can a DIY enthusiast fix the Brake Lamp Switch Circuit Open problem in a Buick?

While some DIY enthusiasts may be able to diagnose and repair the issue themselves, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair of the Brake Lamp Switch Circuit Open problem in a Buick.

8. Is resetting the OBDII code C1295 related to the Brake Lamp Switch Circuit Open sufficient to fix the issue?

Simply resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem causing the C1295 code. It is important to diagnose and repair the root cause of the issue.

9. How much does it typically cost to repair the Brake Lamp Switch Circuit Open issue in a Buick?

The cost of repairing the C1295 code related to the Brake Lamp Switch Circuit Open in a Buick can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.

10. Are there any preventative measures to avoid the Brake Lamp Switch Circuit Open problem in a Buick?

Regularly checking the condition of the brake lights, maintaining the brake lamp switch, and inspecting the wiring connections can help prevent issues related to the Brake Lamp Switch Circuit Open in a Buick.