AutoCodes – Hyundai – C1292 Hyundai

C1292 Hyundai Code - Torque Sensor Signal Fail

Quick Answer

A torque sensor, installed in the middle of the steering column, is one unit composed of a main sensor and sub sensor. Common causes include Faulty Torque Sensor, Torque Sensor harness is open or shorted, Torque Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1292 Hyundai indicates Torque Sensor Signal Fail.
Common causes: Common causes include Faulty Torque Sensor, Torque Sensor harness is open or shorted, Torque Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,046

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1292 Hyundai Description

A torque sensor, installed in the middle of the steering column, is one unit composed of a main sensor and sub sensor. When the steering wheel is turned, the torsion bar is twisted in proportion to a load of the wheel, and the assembled shaft turns as well. At this moment, due to the twist of the shaft, a change in the magnetic field is generated in the main sensor coil surrounds the shaft and in the sub-sensor coil which is inside the torque sensor. The change in current produced by this process is input to the EPS CM. With a change of input sensor signal current, EPS CM determines the driver's steering direction then, comparing current differences between the two sensors, the EPS CM determines whether the main sensor is open/short. The Torque sensor can be damaged during disassembly of the sensor. You must disassemble or remove the sensor when removing or replacing the assembly.

OBDII Code C1292 Hyundai - Torque Sensor Signal Fail - AutoCodes.com — C1292 Hyundai Code - Torque Sensor Signal Fail

What does this mean?

What are the Possible Causes of the DTC C1292 Hyundai?

Faulty Torque Sensor
Torque Sensor harness is open or shorted
Torque Sensor circuit poor electrical connection

How to Fix the DTC C1292 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1292 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1292 Hyundai code?

Need more information on how to fix the C1292 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1292 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1292 Hyundai Code

1. What are common symptoms of OBDII code C1292 in a Hyundai related to the torque sensor signal fail?

- Common symptoms include the ESC (Electronic Stability Control) warning light coming on, difficulty steering, and possible loss of power steering assistance.

2. What usually causes the OBDII code C1292 in a Hyundai indicating a torque sensor signal fail?

- The code C1292 is usually triggered by a fault in the torque sensor within the power steering system, which can be caused by sensor malfunction or wiring issues.

3. How can I diagnose the torque sensor signal fail issue causing OBDII code C1292 in my Hyundai?

- Diagnosis typically involves checking the power steering system for any visible damage, inspecting the torque sensor and its wiring for faults, and using a scan tool to retrieve trouble codes.

4. Is it safe to continue driving my Hyundai with the OBDII code C1292 indicating a torque sensor signal fail?

- It's not recommended to drive the vehicle with the ESC warning light on and potential steering issues. Seek professional help to diagnose and repair the problem promptly.

5. Can I reset the OBDII code C1292 related to the torque sensor signal fail in my Hyundai by disconnecting the battery?

- Disconnecting the battery may temporarily clear the code, but it's important to address the underlying issue causing the fault to prevent the code from reoccurring.

6. How much does it typically cost to repair the torque sensor signal fail issue triggering OBDII code C1292 in a Hyundai?

- The cost of repairing the torque sensor signal fail can vary depending on the exact cause of the issue, but it may involve replacing the torque sensor, repairing wiring, or recalibrating the system.

7. Are there any common DIY repair tips for fixing the torque sensor signal fail problem causing OBDII code C1292 in a Hyundai?

- DIY repairs for this issue are not recommended due to the complexity of the power steering system. It's best to consult a professional mechanic with experience in handling such problems.

8. Can a faulty torque sensor causing OBDII code C1292 in a Hyundai affect the vehicle's overall safety?

- Yes, a faulty torque sensor can impact the vehicle's electronic stability control and power steering, potentially compromising safety while driving. It's crucial to address this issue promptly.

9. Will the OBDII code C1292 related to torque sensor signal fail in a Hyundai reset itself after the issue is fixed?

- After the underlying problem causing the code C1292 is repaired, the code may reset itself after a few successful driving cycles once the system confirms that the issue is resolved.

10. Is it possible for a loose connection to trigger OBDII code C1292 in a Hyundai indicating a torque sensor signal fail?

- Yes, a loose or poor connection in the torque sensor wiring can lead to the torque sensor signal fail issue and trigger the OBDII code C1292 in a Hyundai.