C1283 2016 Chevrolet Silverado Code - Brake Pressure Sensor Information Message Counter Incorrect
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1283 2016 Chevrolet Silverado indicates Brake Pressure Sensor Information Message Counter Incorrect.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1283 2016 Chevrolet Silverado Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C1283 2016 Chevrolet Silverado?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C1283 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1283 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1283 2016 Chevrolet Silverado code?
Need more information on how to fix the C1283 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1283 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1283 2016 Chevrolet Silverado Code
1. What does OBDII code C1283 on a 2016 Chevrolet Silverado mean?
The code C1283 indicates an issue with the Brake Pressure Sensor Information Message Counter Incorrect in the vehicle.
2. What are the common symptoms of OBDII code C1283 on a 2016 Chevrolet Silverado?
Common symptoms of code C1283 may include the ABS warning light illuminating on the dashboard and potential issues with the vehicle's braking system.
3. What are possible causes of OBDII code C1283 on a 2016 Chevrolet Silverado?
Possible causes of code C1283 include a malfunctioning brake pressure sensor, wiring issues, or a problem with the ABS control module.
4. How can I diagnose the cause of OBDII code C1283 on my 2016 Chevrolet Silverado?
Diagnosing code C1283 may involve conducting a thorough inspection of the brake pressure sensor, checking the wiring for any damage, and using a diagnostic scanner to retrieve specific fault codes.
5. Can I still drive my 2016 Chevrolet Silverado with OBDII code C1283?
It is not recommended to drive the vehicle with an active C1283 code, as it may affect the proper functioning of the braking system and compromise safety.
6. How can I repair OBDII code C1283 on a 2016 Chevrolet Silverado?
Repairing code C1283 may involve replacing the faulty brake pressure sensor, repairing any damaged wiring, or addressing issues with the ABS control module as needed.
7. Will resetting the OBDII code C1283 on my 2016 Chevrolet Silverado make it go away permanently?
Simply resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to reappear.
8. Is it safe to continue driving if the ABS warning light is on due to OBDII code C1283 on my 2016 Chevrolet Silverado?
It is not safe to drive the vehicle with the ABS warning light on, as it indicates a potential problem with the braking system that could compromise safety.
9. How much does it typically cost to repair OBDII code C1283 on a 2016 Chevrolet Silverado?
The cost of repairing code C1283 can vary depending on the specific cause of the issue, but it may involve parts and labor expenses for sensor replacement or wiring repairs.
10. Can I fix OBDII code C1283 on my 2016 Chevrolet Silverado myself, or should I take it to a professional mechanic?
While some DIY enthusiasts may attempt to diagnose and repair code C1283, it is recommended to consult a professional mechanic with experience in ABS and brake system repairs for a thorough and accurate fix.
Discuss the causes and fixes for C1283 2016 Chevrolet Silverado OBDII Code
Code C1283 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
