C1283 2015 GMC Sierra Code - Brake Pressure Sensor Information Message Counter Incorrect
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1283 2015 GMC Sierra indicates Brake Pressure Sensor Information Message Counter Incorrect.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1283 2015 GMC Sierra Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C1283 2015 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C1283 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1283 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1283 2015 GMC Sierra code?
Need more information on how to fix the C1283 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1283 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1283 2015 GMC Sierra Code
1. What are the common symptoms of OBDII code C1283 on a 2015 GMC Sierra?
The common symptoms include the illumination of the ABS warning light on the dashboard, a message indicating "Brake Pressure Sensor Information Message Counter Incorrect," and potential issues with the vehicle's brake system.
2. What does the OBDII code C1283 on a 2015 GMC Sierra indicate?
OBDII code C1283 indicates that the Brake Pressure Sensor Information Message Counter is incorrect, suggesting a potential fault in the brake pressure sensor system.
3. What are the possible causes of OBDII code C1283 on a 2015 GMC Sierra?
Possible causes of this code include a faulty brake pressure sensor, damaged wiring or connectors in the brake pressure sensor circuit, or a communication error within the brake system.
4. How can I diagnose the issue related to OBDII code C1283 on my 2015 GMC Sierra?
Diagnosis typically involves using a diagnostic scan tool to retrieve the specific fault codes, inspecting the brake pressure sensor and its wiring for any visible damage, and conducting a thorough brake system inspection.
5. Can driving with OBDII code C1283 on a 2015 GMC Sierra be dangerous?
Driving with this code illuminated can be risky as it may indicate an issue with the brake system, potentially affecting the vehicle's braking performance. It is recommended to address the problem promptly.
6. How can I reset OBDII code C1283 on my 2015 GMC Sierra?
Resetting the code usually involves using a diagnostic scan tool to clear the fault codes after the underlying issue has been diagnosed and repaired. Simply resetting the code without fixing the problem may cause it to reappear.
7. Is it safe to continue driving my 2015 GMC Sierra with OBDII code C1283?
It is not recommended to continue driving the vehicle with this code active, as it may compromise the effectiveness of the brake system. Prompt attention and repair are advised to ensure safe driving.
8. Can I repair OBDII code C1283 on my 2015 GMC Sierra myself?
While some DIY enthusiasts may attempt to diagnose and repair this issue, it is recommended to consult a qualified mechanic or technician with experience in diagnosing and fixing ABS and brake system problems for accurate and safe repairs.
9. How much does it typically cost to repair OBDII code C1283 on a 2015 GMC Sierra?
The cost of repairs can vary depending on the specific cause of the issue. It may involve replacing the brake pressure sensor, repairing damaged wiring, or addressing other underlying problems. Costs can range from a few hundred dollars to over a thousand, including parts and labor.
10. How can I prevent OBDII code C1283 from recurring on my 2015 GMC Sierra?
Regular maintenance of the brake system, including checking for any signs of wear or damage, ensuring proper fluid levels, and addressing any warning lights promptly, can help prevent issues like OBDII code C1283 from recurring.
Discuss the causes and fixes for C1283 2015 GMC Sierra OBDII Code
Code C1283 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
