C1261 KIA Code - Steering Angle Sensor Not Calibrated
Quick Answer
The Steering Angle Sensor(SAS) is installed below the clock spring and it sends messages to HECU through CAN communication line. Common causes include Steering Angle Sensor(SAS) not calibrated, Faulty Steering Angle Sensor(SAS), Steering Angle Sensor(SAS) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1261 KIA indicates Steering Angle Sensor Not Calibrated.
- Common causes
- Common causes include Steering Angle Sensor(SAS) not calibrated, Faulty Steering Angle Sensor(SAS), Steering Angle Sensor(SAS) harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1261 KIA Description
What are the Possible Causes of the DTC C1261 KIA?
- Steering Angle Sensor(SAS) not calibrated
- Faulty Steering Angle Sensor(SAS)
- Steering Angle Sensor(SAS) harness is open or shorted
- Steering Angle Sensor(SAS) circuit poor electrical connection
How to Fix the DTC C1261 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1261 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1261 KIA code?
Need more information on how to fix the C1261 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1261 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1261 KIA Code
1. What are the common symptoms of OBDII code C1261 in a KIA related to the Steering Angle Sensor Not Calibrated?
The common symptoms include the ABS warning light being illuminated on the dashboard, stability control issues, and possible difficulty in steering.
2. What are some possible causes of OBDII code C1261 in a KIA indicating the Steering Angle Sensor Not Calibrated?
Possible causes include a faulty steering angle sensor, poor electrical connections to the sensor, or the sensor needing calibration due to recent wheel alignment or suspension work.
3. How can I diagnose the OBDII code C1261 in a KIA for the Steering Angle Sensor Not Calibrated issue?
You can diagnose the code by using an OBDII scanner to read the fault codes, inspecting the steering angle sensor and its connections, and performing a calibration procedure using specialized diagnostic equipment.
4. Can I drive my KIA with the OBDII code C1261 related to the Steering Angle Sensor Not Calibrated?
It is not recommended to drive the vehicle with this code present as it can affect the proper functioning of the ABS and stability control systems, potentially compromising your safety.
5. Is it possible to reset the OBDII code C1261 in a KIA without fixing the Steering Angle Sensor calibration issue?
Resetting the code without addressing the underlying issue will not solve the problem. The code will likely reappear until the steering angle sensor is calibrated properly or replaced if necessary.
6. How much does it cost to repair the OBDII code C1261 in a KIA due to the Steering Angle Sensor Not Calibrated?
The cost of repair can vary depending on the exact cause of the issue. It may involve recalibrating the sensor, fixing electrical connections, or replacing the sensor altogether, with costs ranging from a simple calibration service fee to a sensor replacement cost.
7. Can I calibrate the Steering Angle Sensor in my KIA at home, or do I need to take it to a mechanic?
Calibrating the steering angle sensor typically requires specialized equipment and knowledge, so it is recommended to have it done by a qualified mechanic or at a service center equipped to perform such procedures.
8. How often should the Steering Angle Sensor in a KIA be recalibrated to prevent OBDII code C1261 from occurring?
The steering angle sensor should be recalibrated whenever there are significant changes to the vehicle's alignment or suspension components, or whenever the sensor is replaced to ensure accurate readings and prevent the code from reoccurring.
9. Are there any DIY tips for troubleshooting the OBDII code C1261 in a KIA linked to the Steering Angle Sensor Not Calibrated?
DIY tips include checking for loose or damaged electrical connections to the sensor, ensuring the sensor is securely mounted and not obstructed, and following the vehicle's service manual for any specific calibration procedures.
10. Can the OBDII code C1261 in a KIA be caused by other issues besides the Steering Angle Sensor Not Calibrated problem?
While the code is commonly associated with steering angle sensor calibration issues, it is possible for other factors like damaged wiring, faulty ABS modules, or sensor malfunctions to trigger the C1261 code as well.
Discuss the causes and fixes for C1261 KIA OBDII Code
Code C1261 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
