C1243 Lexus Code - Acceleration Sensor Stuck Malfunction
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) receives signals from the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) via the Controller Area Network (CAN) communication system. Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1243 Lexus indicates Acceleration Sensor Stuck Malfunction.
- Common causes
- Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1243 Lexus Description
The Airbag Sensor Assembly has a built-in Yaw Rate Sensor and Acceleration Sensor and detects the vehicle's condition.
If there is trouble in the bus lines between the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) and the CAN communication system, the Diagnostic Trouble Code (DTC) U0124 (malfunction in CAN communication with the acceleration sensor) is output.
These DTCs are also output when calibration has not been completed.
What are the Possible Causes of the DTC C1243 Lexus?
- Acceleration Sensor Calibration
- Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly)
- Airbag Sensor Assembly harness is open or shorted
- Airbag Sensor Assembly circuit poor electrical connection
How to Fix the DTC C1243 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1243 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1243 Lexus code?
Need more information on how to fix the C1243 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1243 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1243 Lexus Code
1. What are the common symptoms of OBDII code C1243 in a Lexus related to Acceleration Sensor Stuck Malfunction?
- Common symptoms include poor acceleration, reduced engine power, and the illumination of the check engine light.
2. What can cause the Acceleration Sensor Stuck Malfunction in a Lexus triggering the C1243 code?
- Causes can include a faulty acceleration sensor, damaged wiring or connectors, or issues with the sensor's calibration.
3. How can I diagnose the C1243 code related to Acceleration Sensor Stuck Malfunction in my Lexus?
- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the sensor and related components, and checking for any visible damage.
4. Can driving with the C1243 code in a Lexus be dangerous?
- Continuing to drive with this code may lead to unsafe driving conditions due to potential issues with acceleration and engine performance.
5. What are the recommended repair options for fixing the Acceleration Sensor Stuck Malfunction in a Lexus with the C1243 code?
- Repair options include replacing the faulty acceleration sensor, repairing damaged wiring or connectors, and recalibrating the sensor as needed.
6. Is it possible to reset the C1243 code in a Lexus related to Acceleration Sensor Stuck Malfunction without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is not recommended as the issue causing the code will persist and may lead to further problems.
7. Can a DIY enthusiast fix the Acceleration Sensor Stuck Malfunction causing the C1243 code in a Lexus?
- Depending on the DIYer's skill level and access to tools, it may be possible to address simple issues like sensor replacement or basic wiring repair.
8. How critical is it to address the C1243 code in a Lexus indicating Acceleration Sensor Stuck Malfunction promptly?
- It is important to address this code promptly to prevent potential safety hazards and avoid further damage to the vehicle's components.
9. Are there any preventive measures to avoid encountering the C1243 code related to Acceleration Sensor Stuck Malfunction in a Lexus?
- Regular vehicle maintenance, including sensor checks and inspections, can help prevent issues that may trigger the C1243 code.
10. Can weather conditions or driving habits contribute to triggering the Acceleration Sensor Stuck Malfunction in a Lexus and causing the C1243 code?
- Extreme weather conditions, rough driving habits, and environmental factors can potentially impact sensor performance and contribute to triggering the C1243 code.
Discuss the causes and fixes for C1243 Lexus OBDII Code
Code C1243 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
