C1243 Buick Code - Pump Motor Stalled
Quick Answer
The system relay is energized when the ignition is ON. Common causes include Faulty Brake Pressure Modulator Valve (BPMV), Brake Pressure Modulator Valve (BPMV) harness is open or shorted, Brake Pressure Modulator Valve (BPMV) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1243 Buick indicates Pump Motor Stalled.
- Common causes
- Common causes include Faulty Brake Pressure Modulator Valve (BPMV), Brake Pressure Modulator Valve (BPMV) harness is open or shorted, Brake Pressure Modulator Valve (BPMV) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1243 Buick Description
- Transfers brake fluid from the brake calipers to the master cylinder reservoir during pressure decrease events
- Transfers brake fluid from the master cylinder reservoir to the brake calipers during pressure increase events
What are the Possible Causes of the DTC C1243 Buick?
- Faulty Brake Pressure Modulator Valve (BPMV)
- Brake Pressure Modulator Valve (BPMV) harness is open or shorted
- Brake Pressure Modulator Valve (BPMV) circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C1243 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1243 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1243 Buick code?
Need more information on how to fix the C1243 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1243 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1243 Buick Code
1. What are the common symptoms of OBDII code C1243 (Buick) Pump Motor Stalled?
The common symptoms include the ABS warning light illuminating on the dashboard, potential loss of ABS functionality, and unusual brake pedal behavior.
2. What could be causing the OBDII code C1243 (Buick) Pump Motor Stalled?
Possible causes include a faulty ABS pump motor, damaged wiring or connectors in the ABS system, low brake fluid level, or a malfunctioning ABS control module.
3. How can I diagnose the OBDII code C1243 (Buick) Pump Motor Stalled?
Diagnosing this code typically involves using a professional OBDII scanner to retrieve the specific fault codes, conducting a visual inspection of the ABS system components, and performing electrical tests to pinpoint the issue.
4. Can I still drive my Buick with the OBDII code C1243 Pump Motor Stalled?
It is not recommended to drive the vehicle when the ABS system is compromised as it can affect braking performance and safety. It is advisable to address the issue promptly.
5. What are some DIY repair tips for OBDII code C1243 (Buick) Pump Motor Stalled?
DIY enthusiasts can start by checking the brake fluid level, inspecting the ABS system components for visible damage, and ensuring all wiring connections are secure. However, complex repairs may require professional assistance.
6. Is it safe to continue driving if the ABS warning light is on due to code C1243 (Buick)?
Driving with the ABS warning light on is not recommended as it indicates a potential issue with the ABS system, which could compromise braking performance, especially in emergency situations.
7. How much does it cost to repair OBDII code C1243 (Buick) Pump Motor Stalled?
The cost of repair can vary depending on the specific cause of the issue, parts needed, and labor costs. It is advisable to consult with a qualified mechanic for an accurate diagnosis and cost estimate.
8. Can resetting the OBDII code C1243 (Buick) Pump Motor Stalled fix the issue?
Resetting the code may temporarily turn off the warning light, but it will not address the underlying problem causing the Pump Motor Stalled issue. It is essential to diagnose and fix the root cause.
9. Will code C1243 (Buick) affect the overall performance of my vehicle?
While code C1243 specifically relates to the ABS system, ignoring the issue can impact overall vehicle safety and performance, especially during braking situations. It is crucial to address the problem promptly.
10. How long does it take to repair OBDII code C1243 (Buick) Pump Motor Stalled?
The repair time can vary based on the complexity of the issue, availability of parts, and the expertise of the mechanic. Simple fixes may take a few hours, while more involved repairs could require leaving the vehicle at the shop for a day or more.
Discuss the causes and fixes for C1243 Buick OBDII Code
Code C1243 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
