AutoCodesScion – C1227 Scion

C1227 Scion Code - SA3 Solenoid Circuit

Quick Answer

The SA3 Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1227 Scion indicates SA3 Solenoid Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 857
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 18, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1227 Scion Description

The SA3 Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. The Skid Control ECU (Brake Actuator Assembly) monitors the SA3 Solenoid. The Skid Control ECU (Brake Actuator Assembly) sets the Diagnostic Trouble Code (DTC) when the SA3 Solenoid is not to factory specifications.
OBDII Code C1227 Scion - SA3 Solenoid Circuit - AutoCodes.com
C1227 Scion Code - SA3 Solenoid Circuit

What are the Possible Causes of the DTC C1227 Scion?

  • Faulty Skid Control ECU (Brake Actuator Assembly)

How to Fix the DTC C1227 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1227 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1227 Scion code?

Need more information on how to fix the C1227 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1227 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1227 Scion Code

1. What does the OBDII code C1227 mean on a Scion?

C1227 indicates an issue with the SA3 Solenoid Circuit, which is part of the vehicle's ABS (Anti-lock Braking System) or traction control system.

2. What are the common symptoms of code C1227 on a Scion?

Symptoms may include the ABS warning light on the dashboard, reduced braking performance, or the traction control system not functioning properly.

3. What causes the C1227 code to appear on a Scion?

The code can be triggered by a faulty SA3 solenoid, damaged wiring or connectors in the solenoid circuit, or a malfunctioning ABS module.

4. Can I drive my Scion with the C1227 code active?

While the vehicle may still be drivable, the ABS and traction control systems may not function properly, potentially reducing safety in slippery or emergency braking conditions.

5. How do I diagnose the C1227 code on my Scion?

Start by inspecting the wiring and connectors in the SA3 solenoid circuit for damage or corrosion. Use a multimeter to test the solenoid and check for proper resistance or continuity.

6. How do I fix the C1227 code on a Scion?

Repairs may involve replacing the faulty SA3 solenoid, repairing damaged wiring or connectors, or in some cases, replacing the ABS module.

7. How much does it cost to repair the C1227 code on a Scion?

Repair costs can vary depending on the exact issue, but replacing an ABS solenoid or repairing wiring typically costs between $100–$500, excluding labor.

8. Does clearing the C1227 code fix the problem?

Clearing the code will reset the warning light temporarily, but the issue will return unless the underlying problem with the SA3 solenoid circuit is resolved.

9. What tools are needed to troubleshoot the C1227 code on a Scion?

You’ll need an OBDII scanner, a multimeter, and potentially wiring repair tools to diagnose and fix the issue.

10. Can a faulty ABS module cause the C1227 code on a Scion?

Yes, a malfunctioning ABS module can sometimes trigger the C1227 code if it fails to properly control the SA3 solenoid circuit.

Discuss the causes and fixes for C1227 Scion OBDII Code

Code C1227 Scion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play