C1225 Scion Code - SM Solenoid Circuit
Quick Answer
The SM Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1225 Scion indicates SM Solenoid Circuit.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1225 Scion Description
What are the Possible Causes of the DTC C1225 Scion?
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1225 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1225 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1225 Scion code?
Need more information on how to fix the C1225 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1225 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1225 Scion Code
1. What does the OBDII code C1225 mean on a Scion?
C1225 indicates an issue with the SM Solenoid Circuit, which is part of the vehicle's braking or stability control system.
2. What are the common symptoms of code C1225 in a Scion?
Symptoms may include the ABS or traction control light turning on, reduced braking performance, or difficulty maintaining stability during driving.
3. What causes the C1225 code to appear?
Common causes include a faulty SM solenoid, damaged wiring or connectors, or issues with the ABS control module.
4. Can I still drive my Scion with code C1225?
While the vehicle may still be drivable, braking performance and stability control could be compromised. It’s recommended to address the issue promptly.
5. How do I diagnose the C1225 code on my Scion?
Diagnosis involves checking the SM solenoid, inspecting the wiring and connectors for damage, and testing the ABS control module for proper function.
6. What tools are needed to fix the C1225 code?
You’ll need an OBDII scanner, a multimeter for checking electrical connections, and possibly service manuals for detailed repair instructions.
7. How much does it cost to fix code C1225 on a Scion?
Repair costs vary but can range from $100 to $500 depending on whether wiring needs repair or if the SM solenoid or ABS module needs replacement.
8. Can a dirty or corroded connector cause the C1225 code?
Yes, corroded or loose connectors can disrupt the SM solenoid circuit and trigger the code.
9. Do I need to replace the ABS module to fix code C1225?
Not always. Start by inspecting the solenoid and wiring. Replace the ABS module only if other components are functioning properly and the issue persists.
10. Will clearing the code solve the C1225 issue?
Clearing the code may temporarily remove the warning, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for C1225 Scion OBDII Code
Code C1225 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
