C1224 Lexus Code - NE Circuit Signal
Quick Answer
The Skid Control ECU (ABS Control Module) receives the engine revolution speed signal (NE Signal) from the Engine Control Module (ECM). Common causes include NE Signal (Engine Revolution Speed Signal), Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1224 Lexus indicates NE Circuit Signal.
- Common causes
- Common causes include NE Signal (Engine Revolution Speed Signal), Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1224 Lexus Description
What are the Possible Causes of the DTC C1224 Lexus?
- NE Signal (Engine Revolution Speed Signal)
- Faulty Engine Control Module (ECM)
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
How to Fix the DTC C1224 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1224 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1224 Lexus code?
Need more information on how to fix the C1224 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1224 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1224 Lexus Code
1. What does the OBDII code C1224 mean on a Lexus?
C1224 indicates an issue with the "NE Circuit Signal," which is related to the wheel speed sensor or ABS system functionality.
2. What are the common symptoms of code C1224 in a Lexus?
Symptoms may include the ABS warning light turning on, reduced braking performance, or the traction control system being disabled.
3. What causes the C1224 code on a Lexus?
Common causes include a faulty wheel speed sensor, damaged wiring or connectors in the NE circuit, or an issue with the ABS control module.
4. Can I drive my Lexus with a C1224 code?
While the vehicle may still be drivable, it’s not recommended as the ABS and traction control systems may not function properly, increasing the risk of loss of control in slippery conditions.
5. How can I diagnose the C1224 code on my Lexus?
Start by inspecting the wheel speed sensor and its wiring for damage, check for loose or corroded connectors, and use a scan tool to monitor the sensor's output.
6. How do I fix the C1224 code in a Lexus?
Repairs may involve replacing a faulty wheel speed sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ABS control module if necessary.
7. What tools do I need to troubleshoot the C1224 code?
You’ll need an OBDII scanner capable of reading ABS codes, a multimeter for testing electrical circuits, and possibly a jack to access the wheel speed sensors.
8. How much does it cost to repair a Lexus with a C1224 code?
Repair costs vary but can range from $100 to $300 for a wheel speed sensor replacement and more if ABS module repairs are needed.
9. Can a C1224 code clear itself on a Lexus?
It’s unlikely; the code will persist until the underlying issue is addressed and the fault is cleared with an OBDII scanner.
10. Does a C1224 code always mean the wheel speed sensor is bad?
No, the issue could also stem from wiring, connectors, or the ABS control module, so thorough diagnostics are essential.
Discuss the causes and fixes for C1224 Lexus OBDII Code
-
Es300 is making a popping noise when you start the engine. Code reads c1224
-
I doubt the noise is related to the code. What year is your ES300? I can check a database of repairs for the symptoms you have.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
