AutoCodesMercury – C1204 Mercury

C1204 Mercury Code - ABS Rear Dump Valve Circuit Short To Battery

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the ABS Rear Dump Valve. Common causes include Faulty ABS Rear Dump Valve, ABS Rear Dump Valve harness is open or shorted, ABS Rear Dump Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1204 Mercury indicates ABS Rear Dump Valve Circuit Short To Battery.
Common causes
Common causes include Faulty ABS Rear Dump Valve, ABS Rear Dump Valve harness is open or shorted, ABS Rear Dump Valve circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 935
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 21, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1204 Mercury Description

The Anti-Lock Brake System (ABS) Module monitors the ABS Rear Dump Valve. The ABS Module sets the OBDII code when the ABS Rear Dump Valve is not to factory specifications.
OBDII Code C1204 Mercury - ABS Rear Dump Valve Circuit Short To Battery - AutoCodes.com
C1204 Mercury Code - ABS Rear Dump Valve Circuit Short To Battery

What are the Possible Causes of the DTC C1204 Mercury?

  • Faulty ABS Rear Dump Valve
  • ABS Rear Dump Valve harness is open or shorted
  • ABS Rear Dump Valve circuit poor electrical connection

How to Fix the DTC C1204 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1204 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1204 Mercury code?

Need more information on how to fix the C1204 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1204 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1204 Mercury Code

1. What does the OBDII code C1204 mean on a Mercury vehicle?

C1204 indicates an issue with the ABS rear dump valve circuit, specifically a short to the battery.

2. What are the symptoms of the C1204 code on a Mercury?

Common symptoms include the ABS warning light illuminated, reduced braking performance, and potential ABS system malfunction.

3. What causes the C1204 code to appear?

The code is usually caused by damaged wiring, a faulty ABS dump valve, a short circuit in the electrical system, or a malfunctioning ABS control module.

4. Is it safe to drive with the C1204 code active?

While the vehicle may still be drivable, the ABS system may not function properly, which can compromise braking safety in emergency situations.

5. How can I diagnose the C1204 code on my Mercury?

Start by inspecting the ABS wiring and connectors for damage or corrosion, check for short circuits, and test the rear dump valve for proper operation.

6. Can a blown fuse cause the C1204 code?

Yes, a blown ABS fuse could potentially cause electrical issues, including this code, so it's important to inspect the fuses during diagnosis.

7. How is the C1204 code typically fixed?

Repairs may include replacing damaged wiring, repairing connectors, replacing the rear dump valve, or addressing issues with the ABS control module.

8. How much does it cost to fix the C1204 code on a Mercury?

Repair costs can vary widely but typically range from $100 to $500, depending on whether wiring repairs or component replacements are needed.

9. Can I reset the C1204 code without fixing the problem?

You can clear the code with an OBDII scanner, but it will likely return if the underlying issue isn’t addressed.

10. What tools are needed to troubleshoot the C1204 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly a repair manual for your specific Mercury model.

Discuss the causes and fixes for C1204 Mercury OBDII Code

Code C1204 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play