AutoCodes – Mercury – C1127 Mercury

C1127 Mercury Code - Deactivator Switch Circuit Failure

Quick Answer

The Powertrain Control Module (PCM) monitors the Speed Control Actuator Switch. Common causes include Faulty Speed Control Actuator Switch, Speed Control Actuator Switch harness is open or shorted, Speed Control Actuator Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1127 Mercury indicates Deactivator Switch Circuit Failure.
Common causes: Common causes include Faulty Speed Control Actuator Switch, Speed Control Actuator Switch harness is open or shorted, Speed Control Actuator Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,236

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 16, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1127 Mercury Description

The Powertrain Control Module (PCM) monitors the Speed Control Actuator Switch. The PCM sets the OBDII code when the Speed Control Actuator Switch is not to factory specifications.

OBDII Code C1127 Mercury - Deactivator Switch Circuit Failure - AutoCodes.com — C1127 Mercury Code - Deactivator Switch Circuit Failure

What does this mean?

What are the Possible Causes of the DTC C1127 Mercury?

Faulty Speed Control Actuator Switch
Speed Control Actuator Switch harness is open or shorted
Speed Control Actuator Switch circuit poor electrical connection

How to Fix the DTC C1127 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1127 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1127 Mercury code?

Need more information on how to fix the C1127 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1127 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1127 Mercury Code

1. What does the OBDII code C1127 mean for a Mercury vehicle?

C1127 indicates a Deactivator Switch Circuit Failure, meaning there is a malfunction in the circuit responsible for deactivating the cruise control or other related systems.

2. What are the common symptoms of code C1127 in a Mercury?

Symptoms may include the cruise control not working, a warning light on the dashboard, or inconsistent cruise control operation.

3. What causes the C1127 code to appear?

This code is typically caused by a faulty deactivator switch, damaged wiring or connectors, or an issue with the cruise control module.

4. How can I diagnose code C1127 on my Mercury?

Start by inspecting the deactivator switch and its wiring for damage or loose connections. Use a multimeter to test continuity and ensure the circuit is functioning properly.

5. Can I drive my Mercury with the C1127 code?

Yes, but the cruise control system may not function correctly, and safety features tied to the deactivator switch may be compromised.

6. How do I fix the C1127 code on a Mercury?

The repair may involve replacing the deactivator switch, repairing or replacing damaged wiring or connectors, or recalibrating the cruise control system.

7. How much does it cost to repair code C1127 on a Mercury?

The cost varies depending on the issue but typically ranges from $100 to $300, including parts and labor.

8. Can a faulty brake switch cause the C1127 code?

Yes, if the brake switch is integrated with the deactivator switch, a malfunction can trigger this code.

9. Is it possible for the C1127 code to clear itself?

No, the code will remain active until the underlying issue is fixed and the system is reset.

10. Do I need special tools to fix the C1127 code?

Basic tools like a multimeter and an OBDII scanner are sufficient for diagnosis, but specific repairs may require additional tools depending on the issue.