AutoCodes – Buick – C1101 Buick

C1101 Buick Code - Brake Booster Vacuum Sensor Performance

Quick Answer

The Electronic Brake Control Module (EBCM) provides a power 5-volt reference to the brake booster vacuum sensor. Common causes include Faulty Brake Booster Vacuum Sensor, Brake Booster Vacuum Sensor harness is open or shorted, Brake Booster Vacuum Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1101 Buick indicates Brake Booster Vacuum Sensor Performance.
Common causes: Common causes include Faulty Brake Booster Vacuum Sensor, Brake Booster Vacuum Sensor harness is open or shorted, Brake Booster Vacuum Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,264

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1101 Buick Description

The Electronic Brake Control Module (EBCM) provides a power 5-volt reference to the brake booster vacuum sensor. The brake booster vacuum sensor converts the change in vacuum levels in the brake booster into a voltage signal. This signal is sent to the EBCM. The voltage signal ranges, from 0.13 to 3.30 volts depending on vacuum levels. The low reference is the return side of the sensor to ground.

OBDII Code C1101 Buick - Brake Booster Vacuum Sensor Performance - AutoCodes.com — C1101 Buick Code - Brake Booster Vacuum Sensor Performance

What does this mean?

What are the Possible Causes of the DTC C1101 Buick?

Faulty Brake Booster Vacuum Sensor
Brake Booster Vacuum Sensor harness is open or shorted
Brake Booster Vacuum Sensor circuit poor electrical connection

How to Fix the DTC C1101 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1101 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1101 Buick code?

Need more information on how to fix the C1101 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1101 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.