AutoCodes – Mitsubishi – C1078 Mitsubishi

C1078 Mitsubishi Code - Tire Turning Malfunction

Quick Answer

The wheel speed is observed when the steering angle is in the neutral position, and the code is set when the wheel speed, which is more than the specified value, is detected. Common causes include Tire with incorrect diameter equipped, Improper tire pressure, Faulty All Wheel Control (AWC) Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1078 Mitsubishi indicates Tire Turning Malfunction.
Common causes: Common causes include Tire with incorrect diameter equipped, Improper tire pressure, Faulty All Wheel Control (AWC) Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,872

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1078 Mitsubishi Description

The wheel speed is observed when the steering angle is in the neutral position, and the code is set when the wheel speed, which is more than the specified value, is detected.

OBDII Code C1078 Mitsubishi - Tire Turning Malfunction - AutoCodes.com — C1078 Mitsubishi Code - Tire Turning Malfunction

What does this mean?

What are the Possible Causes of the DTC C1078 Mitsubishi?

Tire with incorrect diameter equipped
Improper tire pressure
Faulty All Wheel Control (AWC) Module
Faulty Active Stability Control (ASC) Module

How to Fix the DTC C1078 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1078 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1078 Mitsubishi code?

Need more information on how to fix the C1078 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1078 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1078 Mitsubishi Code

1. What are the common symptoms of OBDII code C1078 "Tire Turning Malfunction" in a Mitsubishi?

When this code is triggered, you may experience issues with the vehicle's stability control system, such as traction control or ABS not functioning properly.

2. What can cause the OBDII code C1078 to appear in a Mitsubishi?

This code typically indicates a problem with the steering angle sensor or steering system components, such as damaged wires or connectors.

3. How can I diagnose the cause of OBDII code C1078 in my Mitsubishi?

Diagnosing this code usually involves conducting a thorough inspection of the steering angle sensor, steering system components, and related wiring for any signs of damage or malfunction.

4. Can I still drive my Mitsubishi with OBDII code C1078 present?

It is not recommended to drive your vehicle with this code active, as it may affect the performance of crucial safety systems like stability control.

5. What are some repair tips for addressing OBDII code C1078 in a Mitsubishi?

Start by checking the condition of the steering angle sensor and its connections. Replace any damaged components and reset the code to see if the issue is resolved.

6. Is it possible to reset OBDII code C1078 in a Mitsubishi without making any repairs?

While clearing the code may temporarily turn off the warning light, the underlying issue causing the code will persist. It is essential to diagnose and repair the problem to ensure safe driving.

7. How much does it typically cost to repair OBDII code C1078 in a Mitsubishi?

The cost of repairs can vary depending on the extent of the issue and the specific component that needs to be replaced. It is recommended to consult with a professional mechanic for an accurate estimate.

8. Can extreme weather conditions trigger OBDII code C1078 in a Mitsubishi?

Extreme weather conditions, such as very cold temperatures affecting the steering system, could potentially contribute to triggering this code. Regular maintenance and inspections can help prevent such issues.

9. Are there any preventive measures to avoid OBDII code C1078 in a Mitsubishi?

Regularly servicing and inspecting the steering system, steering angle sensor, and related components can help prevent issues that may lead to the activation of this code.

10. How serious is OBDII code C1078 in a Mitsubishi, and should it be addressed immediately?

This code indicates a malfunction in a critical safety system, so it is important to address it promptly to ensure the proper functioning of stability control features and maintain safe driving conditions.