C1049 Chrysler Code - Right Rear Wheel Pressure Phase Monitoring
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Right Rear Wheel Pressure Phase. Common causes include Dirty Right Rear Tone Wheel, Dirty Right Rear Wheel Speed Sensor (WSS), Faulty Right Rear Wheel Speed Sensor (WSS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1049 Chrysler indicates Right Rear Wheel Pressure Phase Monitoring.
- Common causes
- Common causes include Dirty Right Rear Tone Wheel, Dirty Right Rear Wheel Speed Sensor (WSS), Faulty Right Rear Wheel Speed Sensor (WSS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1049 Chrysler Description
What are the Possible Causes of the DTC C1049 Chrysler?
- Dirty Right Rear Tone Wheel
- Dirty Right Rear Wheel Speed Sensor (WSS)
- Faulty Right Rear Wheel Speed Sensor (WSS)
- Right Rear Wheel Speed Sensor (WSS) harness is open or shorted
- Right Rear Wheel Speed Sensor (WSS) circuit poor electrical connection
- Damage Right Rear Tone Wheel
- Faulty Anti-Lock Brake System (ABS) Module
How to Fix the DTC C1049 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1049 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1049 Chrysler code?
Need more information on how to fix the C1049 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1049 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1049 Chrysler Code
1. What are the common symptoms of OBDII code C1049 in a Chrysler related to Right Rear Wheel Pressure Phase Monitoring?
- Common symptoms include the illumination of the ABS warning light on the dashboard and potential issues with the right rear wheel's pressure monitoring system.
2. What could cause OBDII code C1049 to trigger in a Chrysler's Right Rear Wheel Pressure Phase Monitoring system?
- Possible causes may include a malfunctioning wheel speed sensor, faulty pressure sensor in the right rear wheel, wiring issues, or a problem with the ABS module.
3. How can I diagnose the OBDII code C1049 related to Right Rear Wheel Pressure Phase Monitoring in my Chrysler?
- Diagnosis involves using a professional OBDII scanner to read the fault codes, conducting a visual inspection of the wheel and pressure sensors, and performing a system test to identify the specific issue.
4. Can I continue driving my Chrysler if OBDII code C1049 is present for Right Rear Wheel Pressure Phase Monitoring?
- It is not recommended to continue driving the vehicle with this code active, as it may affect the proper function of the ABS system and compromise overall safety.
5. What are some repair tips for addressing OBDII code C1049 in a Chrysler's Right Rear Wheel Pressure Phase Monitoring?
- Repair tips may include checking and repairing any damaged wiring, replacing faulty sensors, ensuring proper sensor calibration, and resetting the fault codes after the issue is resolved.
6. Is it possible to reset OBDII code C1049 in a Chrysler without fixing the underlying issue with the Right Rear Wheel Pressure Phase Monitoring?
- While you can clear the fault code temporarily, it is crucial to address the root cause of the problem to prevent it from reoccurring and ensure the safety and functionality of the ABS system.
7. How much does it typically cost to repair OBDII code C1049 in a Chrysler's Right Rear Wheel Pressure Phase Monitoring system?
- The cost of repair can vary depending on the specific issue, parts needed, and labor rates, but it is advisable to consult with a professional mechanic for an accurate estimate.
8. Can extreme weather conditions or rough road surfaces trigger OBDII code C1049 in a Chrysler's Right Rear Wheel Pressure Phase Monitoring system?
- Yes, harsh weather conditions or driving on rough roads can potentially impact the sensors and cause fluctuations in pressure readings, leading to the activation of the fault code.
9. Are there any preventative maintenance measures I can take to avoid OBDII code C1049 in the Right Rear Wheel Pressure Phase Monitoring system of my Chrysler?
- Regularly inspecting and maintaining the tire pressure, ensuring proper wheel sensor function, and keeping the ABS system in good condition can help prevent issues that trigger this fault code.
10. How long does it typically take to repair OBDII code C1049 related to Right Rear Wheel Pressure Phase Monitoring in a Chrysler?
- The repair time can vary based on the specific issue and complexity of the repair, but it may range from a few hours to a full day, depending on the extent of the troubleshooting and replacement required.
Discuss the causes and fixes for C1049 Chrysler OBDII Code
Code C1049 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
