C1047 Dodge Code - Right Front Wheel Pressure Phase Monitoring
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Right Front Wheel Pressure Phase. Common causes include Dirty Right Front Tone Wheel, Dirty Right Front Wheel Speed Sensor (WSS), Faulty Right Front Wheel Speed Sensor (WSS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1047 Dodge indicates Right Front Wheel Pressure Phase Monitoring.
- Common causes
- Common causes include Dirty Right Front Tone Wheel, Dirty Right Front Wheel Speed Sensor (WSS), Faulty Right Front Wheel Speed Sensor (WSS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1047 Dodge Description
What are the Possible Causes of the DTC C1047 Dodge?
- Dirty Right Front Tone Wheel
- Dirty Right Front Wheel Speed Sensor (WSS)
- Faulty Right Front Wheel Speed Sensor (WSS)
- Right Front Wheel Speed Sensor (WSS) harness is open or shorted
- Right Front Wheel Speed Sensor (WSS) circuit poor electrical connection
- Damage Right Front Tone Wheel
- Faulty Anti-Lock Brake System (ABS) Module
How to Fix the DTC C1047 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1047 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1047 Dodge code?
Need more information on how to fix the C1047 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1047 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1047 Dodge Code
1. What does the OBDII code C1047 mean on a Dodge vehicle?
C1047 indicates an issue with the right front wheel pressure phase monitoring, typically related to the ABS (anti-lock braking system) or wheel speed sensor.
2. What are the common symptoms of the C1047 code?
Symptoms may include an illuminated ABS or traction control warning light, reduced braking performance, or difficulty with traction control activation.
3. What causes the C1047 code to be triggered?
Common causes include a faulty right front wheel speed sensor, damaged wiring or connectors, a failing ABS module, or issues with the wheel bearing affecting sensor readings.
4. Can I continue driving with the C1047 code active?
While the vehicle may still be drivable, the ABS and traction control systems may not function correctly, increasing the risk of skidding during hard braking or on slippery surfaces.
5. How do I diagnose the C1047 code?
Start by visually inspecting the right front wheel speed sensor and its wiring for damage. Use a scan tool to check live sensor data and verify if the sensor is providing accurate readings.
6. How can I fix the C1047 code on a Dodge?
Repairs may involve replacing the right front wheel speed sensor, repairing damaged wiring or connectors, or addressing ABS module issues if necessary.
7. How much does it cost to fix the C1047 code?
The cost varies depending on the issue. Replacing a wheel speed sensor typically costs $100–$300, while ABS module repairs may range from $400–$1,000.
8. Can a bad wheel bearing cause the C1047 code?
Yes, a worn or damaged wheel bearing can affect the wheel speed sensor’s ability to detect accurate data, leading to the C1047 code.
9. Will resetting the code fix the issue?
Resetting the code without addressing the underlying problem will not fix the issue, and the code is likely to reappear.
10. Do I need special tools to fix the C1047 code?
Yes, diagnosing and repairing this code may require an OBDII scan tool and a multimeter to test sensor functionality and wiring continuity.
Discuss the causes and fixes for C1047 Dodge OBDII Code
Code C1047 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
