AutoCodes – Jeep – C1040 Jeep

C1040 Jeep Code - Rear Wheel Speed Comparative Performance

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Rear Wheel Speed Sensor. Common causes include Faulty Rear Wheel Speed Sensor, Rear Wheel Speed Sensor harness is open or shorted, Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1040 Jeep indicates Rear Wheel Speed Comparative Performance.
Common causes: Common causes include Faulty Rear Wheel Speed Sensor, Rear Wheel Speed Sensor harness is open or shorted, Rear Wheel Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,707

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1040 Jeep Description

The Anti-Lock Brake System (ABS) Module monitors the Rear Wheel Speed Sensor. Each time excessive wheel speed sensor acceleration or deceleration is detected, a fault counter increments. If the fault counter exceeds a specified value, the DTC will set.

OBDII Code C1040 Jeep - Rear Wheel Speed Comparative Performance - AutoCodes.com — C1040 Jeep Code - Rear Wheel Speed Comparative Performance

What does this mean?

What are the Possible Causes of the DTC C1040 Jeep?

Faulty Rear Wheel Speed Sensor
Rear Wheel Speed Sensor harness is open or shorted
Rear Wheel Speed Sensor circuit poor electrical connection

How to Fix the DTC C1040 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1040 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1040 Jeep code?

Need more information on how to fix the C1040 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1040 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1040 Jeep Code

1. What are the common symptoms of OBDII code C1040 in a Jeep related to Rear Wheel Speed Comparative Performance?

- Common symptoms include traction control or ABS warning lights illuminated on the dashboard, erratic behavior of the anti-lock brake system, and potential loss of stability control.

2. What are the possible causes of OBDII code C1040 in a Jeep?

- The code C1040 typically indicates a problem with the rear wheel speed sensors, wiring issues, faulty sensors, or issues with the ABS control module.

3. How can I diagnose the cause of OBDII code C1040 in my Jeep?

- A diagnostic scan tool can be used to read the specific wheel speed sensor that is causing the issue. Additionally, visually inspecting the wiring harness and connectors for damage or corrosion can help pinpoint the problem.

4. Can driving with OBDII code C1040 in a Jeep be dangerous?

- Driving with this code may compromise the performance of the anti-lock brake system and stability control, potentially affecting the vehicle's ability to brake safely in certain conditions. It is recommended to address the issue promptly.

5. Are there any DIY repair tips for fixing OBDII code C1040 in a Jeep?

- DIY repair tips include checking and cleaning the wheel speed sensors and connectors, ensuring proper wiring connections, and resetting the fault codes using a diagnostic tool after addressing any identified issues.

6. How much does it typically cost to repair OBDII code C1040 in a Jeep?

- The cost of repair can vary depending on the exact cause of the issue. Replacing a faulty wheel speed sensor can cost anywhere from $100 to $200, while addressing wiring issues or ABS module problems may be more expensive.

7. Can I continue driving my Jeep with the ABS or traction control warning lights on due to OBDII code C1040?

- While the vehicle may still be drivable, it is not recommended to continue driving with the ABS or traction control systems compromised. It is best to address the issue promptly to ensure safe operation of the vehicle.

8. Will resetting the OBDII code C1040 in my Jeep make the problem go away permanently?

- Resetting the code may temporarily turn off the warning lights, but if the underlying issue causing the code is not addressed, the problem is likely to reoccur.

9. How long does it take to repair OBDII code C1040 in a Jeep?

- The repair time can vary based on the specific cause of the issue. Simple fixes like cleaning connectors may take a short amount of time, while replacing a faulty sensor or addressing more complex wiring problems may require more time.

10. Can a mechanic easily fix OBDII code C1040 in a Jeep, or is it a complex repair?

- A qualified mechanic with experience in diagnosing and repairing ABS and traction control systems should be able to efficiently address OBDII code C1040 in a Jeep. The complexity of the repair will depend on the specific cause of the issue.