AutoCodes – Jeep – C1036 Jeep

C1036 Jeep Code - Rear Wheel Speed Sensor Circuit

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Rear Wheel Speed Sensor. Common causes include Faulty Rear Wheel Speed Sensor, Rear Wheel Speed Sensor harness is open or shorted, Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1036 Jeep indicates Rear Wheel Speed Sensor Circuit.
Common causes: Common causes include Faulty Rear Wheel Speed Sensor, Rear Wheel Speed Sensor harness is open or shorted, Rear Wheel Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,380

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1036 Jeep Description

The Anti-Lock Brake System (ABS) Module monitors the Rear Wheel Speed Sensor. The ABS Module sets the OBDII code when the Rear Wheel Speed Sensor is not to factory specifications.

OBDII Code C1036 Jeep - Rear Wheel Speed Sensor Circuit - AutoCodes.com — C1036 Jeep Code - Rear Wheel Speed Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC C1036 Jeep?

Faulty Rear Wheel Speed Sensor
Rear Wheel Speed Sensor harness is open or shorted
Rear Wheel Speed Sensor circuit poor electrical connection

How to Fix the DTC C1036 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1036 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1036 Jeep code?

Need more information on how to fix the C1036 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1036 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1036 Jeep Code

1. What are the common symptoms of OBDII code C1036 in a Jeep related to the rear wheel speed sensor circuit?

The common symptoms include the ABS warning light illuminating on the dashboard, traction control issues, and potential loss of stability control.

2. What are the possible causes of OBDII code C1036 in a Jeep?

The code C1036 in a Jeep typically indicates a fault in the rear wheel speed sensor circuit, which could be caused by a faulty wheel speed sensor, damaged wiring, or a malfunctioning ABS module.

3. How can I diagnose the rear wheel speed sensor circuit issue causing OBDII code C1036 in my Jeep?

You can diagnose the issue by visually inspecting the wiring and sensor for damage, testing the sensor's resistance, checking for proper voltage supply, and using a scan tool to read live data from the ABS module.

4. Can I still drive my Jeep with OBDII code C1036 present?

It is not recommended to drive your Jeep with code C1036 present, as it may affect the proper functioning of the ABS system, traction control, and stability control, compromising your safety on the road.

5. How can I repair OBDII code C1036 related to the rear wheel speed sensor circuit in my Jeep?

Repairing the issue may involve replacing the faulty rear wheel speed sensor, repairing damaged wiring, or addressing any issues with the ABS module. It is recommended to follow the manufacturer's diagnostic and repair procedures.

6. Are there any DIY tips for troubleshooting OBDII code C1036 in a Jeep before taking it to a mechanic?

You can start by checking the sensor and wiring for visible damage, ensuring proper connections, and resetting the code to see if it reoccurs. However, for a thorough diagnosis and repair, it's advisable to consult a professional mechanic.

7. How much does it typically cost to fix OBDII code C1036 in a Jeep related to the rear wheel speed sensor circuit?

The cost of fixing code C1036 in a Jeep can vary depending on the cause of the issue, the parts needed for repair, and the labor costs. It's best to get a diagnostic from a qualified mechanic for an accurate estimate.

8. Can a faulty rear wheel speed sensor impact other systems in my Jeep besides the ABS?

Yes, a faulty rear wheel speed sensor can affect other systems like the traction control and stability control, as they rely on accurate wheel speed data to operate effectively.

9. How urgent is it to address OBDII code C1036 in a Jeep related to the rear wheel speed sensor circuit?

It is important to address code C1036 promptly to ensure the proper functioning of the ABS system and related safety features in your Jeep. Ignoring the issue may lead to compromised vehicle stability and control.

10. Is it possible for OBDII code C1036 in a Jeep to be triggered intermittently?

Yes, OBDII code C1036 can be triggered intermittently if the issue with the rear wheel speed sensor circuit is intermittent. It's crucial to address the problem even if it occurs sporadically to avoid potential safety risks.