C1032 Dodge Code - Right Rear Wheel Speed Sensor Signal Erratic Performance
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Right Rear Wheel Speed Sensor. Common causes include Tire air pressure mismatch, Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1032 Dodge indicates Right Rear Wheel Speed Sensor Signal Erratic Performance.
- Common causes
- Common causes include Tire air pressure mismatch, Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1032 Dodge Description
What are the Possible Causes of the DTC C1032 Dodge?
- Tire air pressure mismatch
- Faulty Right Rear Wheel Speed Sensor
- Right Rear Wheel Speed Sensor harness is open or shorted
- Right Rear Wheel Speed Sensor circuit poor electrical connection
- Faulty Anti-Lock Brake System (ABS) Module
How to Fix the DTC C1032 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1032 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1032 Dodge code?
Need more information on how to fix the C1032 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1032 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1032 Dodge Code
1. What does the OBDII code C1032 mean on a Dodge vehicle?
C1032 indicates that the right rear wheel speed sensor is sending erratic or inconsistent signals to the ABS module, potentially affecting vehicle braking and stability systems.
2. What are the common symptoms of the C1032 code?
Common symptoms include the ABS warning light or traction control light turning on, reduced ABS functionality, or inconsistent braking performance.
3. What causes the C1032 code to appear?
Possible causes include a faulty right rear wheel speed sensor, damaged wiring or connectors, debris interfering with the sensor, or issues with the ABS tone ring.
4. How can I diagnose the C1032 code?
Start by inspecting the right rear wheel speed sensor, its wiring, and the tone ring for damage or debris. Use a multimeter to test sensor resistance and verify signal output if necessary.
5. Can I drive with the C1032 code active?
While the vehicle may still be drivable, ABS and traction control systems may not function properly, increasing the risk of skidding or losing control during hard braking or slippery conditions.
6. How do I fix the C1032 error code on my Dodge?
Repairs may involve cleaning or replacing the right rear wheel speed sensor, repairing damaged wiring, or replacing a worn tone ring. In some cases, recalibrating the ABS module may also be necessary.
7. How much does it cost to repair the C1032 code?
Repair costs vary but typically range from $100 to $300, depending on whether the issue is a simple sensor replacement or requires additional repairs to wiring or the tone ring.
8. Can a dirty wheel speed sensor cause the C1032 code?
Yes, dirt, debris, or corrosion on the sensor or tone ring can cause erratic signals and trigger the C1032 code.
9. Does the C1032 code affect other systems in the vehicle?
Yes, the C1032 code can impact ABS, traction control, and stability control systems, potentially compromising vehicle safety in certain conditions.
10. Do I need to clear the C1032 code after repairs?
Yes, after repairing the issue, use an OBDII scanner to clear the code and verify that it does not return during a test drive.
Discuss the causes and fixes for C1032 Dodge OBDII Code
Code C1032 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
