AutoCodes – Suzuki – C1022 Suzuki

C1022 Suzuki Code - Right Front Wheel Speed Sensor Circuit

Quick Answer

The Anti-Lock Brake System (ABS) control module monitors the voltage at the positive (+) terminal of each sensor while the ignition switch is ON. Common causes include Faulty Right Front Wheel Speed Sensor, Right Front Wheel Speed Sensor harness is open or shorted, Right Front Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1022 Suzuki indicates Right Front Wheel Speed Sensor Circuit.
Common causes
Common causes include Faulty Right Front Wheel Speed Sensor, Right Front Wheel Speed Sensor harness is open or shorted, Right Front Wheel Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 23,049
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 06, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C1022 Suzuki Description

The Anti-Lock Brake System (ABS) control module monitors the voltage at the positive (+) terminal of each sensor while the ignition switch is ON. When the voltage is not within the specified range, an applicable Diagnostic Trouble Code (DTC) will be set. Also, when the ABS control module detects a sensor which outputs an abnormal signal while comparing signals from wheel speed sensors, an applicable DTC will be set.
OBDII Code C1022 Suzuki - Right Front Wheel Speed Sensor Circuit - AutoCodes.com
C1022 Suzuki Code - Right Front Wheel Speed Sensor Circuit

What are the Possible Causes of the DTC C1022 Suzuki?

  • Faulty Right Front Wheel Speed Sensor
  • Right Front Wheel Speed Sensor harness is open or shorted
  • Right Front Wheel Speed Sensor circuit poor electrical connection

How to Fix the DTC C1022 Suzuki?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1022 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1022 Suzuki code?

Need more information on how to fix the C1022 Suzuki code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1022 Suzuki code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1022 Suzuki Code

1. What are the common symptoms of OBDII code C1022 Suzuki (Right Front Wheel Speed Sensor Circuit)?

- Common symptoms include the ABS warning light illuminating on the dashboard, erratic ABS system behavior, and potential loss of traction control.

2. What are some possible causes of OBDII code C1022 Suzuki?

- Possible causes include a faulty right front wheel speed sensor, damaged wiring or connectors in the sensor circuit, or issues with the ABS control module.

3. How can I diagnose the cause of OBDII code C1022 Suzuki?

- Diagnosis typically involves visually inspecting the right front wheel speed sensor and its wiring, performing electrical tests on the sensor circuit, and using a scan tool to read live data from the ABS module.

4. Can I still drive my vehicle with OBDII code C1022 Suzuki active?

- It is generally safe to drive with this code, but it is recommended to have the issue diagnosed and repaired as soon as possible to ensure the proper functioning of the ABS system.

5. How can I repair OBDII code C1022 Suzuki?

- Repair methods may include replacing the right front wheel speed sensor, repairing damaged wiring or connectors, or reprogramming the ABS control module if necessary.

6. Are there any DIY tips for fixing OBDII code C1022 Suzuki?

- DIY tips may include checking for loose or damaged wiring around the right front wheel speed sensor, cleaning the sensor and its mounting surface, and ensuring proper sensor alignment during installation.

7. Will resetting the OBDII code C1022 Suzuki clear the issue?

- Resetting the code may temporarily turn off the warning light, but if the underlying issue is not addressed, the code is likely to reappear upon driving and the ABS system will still be affected.

8. How much does it typically cost to repair OBDII code C1022 Suzuki at a mechanic or dealership?

- The cost of repair can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor, excluding diagnostic fees.

9. Can OBDII code C1022 Suzuki affect other systems in the vehicle?

- While this code primarily relates to the ABS system, it can indirectly impact the vehicle's stability control and traction control systems if left unresolved.

10. How long does it take to repair OBDII code C1022 Suzuki?

- Repair time can vary based on the complexity of the issue and the availability of parts, but a skilled mechanic can typically resolve this code within a few hours to a day.

Discuss the causes and fixes for C1022 Suzuki OBDII Code

  • Hi, I have C1022 and the fault indicates Front R speed sensor or encoder. The sensor is reading 11 km/h at idle. The sensor is fine because when disconnected the fault comes up for an intermittent fault on the sensor when reconnected.

    Vehicle had a puncture last night and the space saver was fitted. The fault came on when driving home after having the tyre replaced and refitted to the car. ABS and ESP warning lights came on.

    Any help will be appreciated.
    Chris

  • What model and year is your vehicle? first thing you should do is remove the sensor and inspect the and wires for any damage. Sometimes the sensor can get damage while repairing the tire or driving with a flat tire.

  • Sensor is fine. Reads information.

    New update, if I put on the space saver and drive the warnings go out and the fault becomes intermittent and I can clear it. Put the normal wheel on again and drive over 40 km/h and the fault comes back as present and cannot be deleted.
    2011 Suzuki Swift SZ3

  • Hi Dr Suzuki. Issue resolved. Put on space saver and drove a short distance and lights went off. Fit normal wheel and started engine and cleared intermittent fault. Turned off traction control by using the button on dash by side of steering wheel and took for a 15 min drive above 40 km/h. Turned off engine and restarted and on testing the re are no faults now and the abs and traction lights do not come on.

    Thanks for your help.
    Chris

  • I'm glad you fixed the problem. Thank you for letting us know.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play