C1014 Mercury Code - Brake System Total Volume Balance
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Brake Booster Travel Sensor and Brake Fluid Pressure Sensor. Common causes include Faulty Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor harness is open or shorted, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1014 Mercury indicates Brake System Total Volume Balance.
- Common causes
- Common causes include Faulty Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor harness is open or shorted, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1014 Mercury Description
What are the Possible Causes of the DTC C1014 Mercury?
- Faulty Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor
- Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor harness is open or shorted
- Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor circuit poor electrical connection
How to Fix the DTC C1014 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1014 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1014 Mercury code?
Need more information on how to fix the C1014 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1014 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1014 Mercury Code
1. What are the common symptoms of OBDII code C1014 in a Mercury related to the Brake System Total Volume Balance?
The common symptoms include an illuminated brake warning light on the dashboard, decreased brake performance, and potential ABS system malfunctions.
2. What are the possible causes of OBDII code C1014 in a Mercury indicating Brake System Total Volume Balance issues?
Potential causes can include low brake fluid levels, air bubbles in the brake system, malfunctioning brake components, or issues with the ABS module.
3. How can I diagnose the OBDII code C1014 in my Mercury related to Brake System Total Volume Balance?
Diagnosis involves checking the brake fluid level, inspecting for any leaks in the brake system, examining the ABS module for faults, and performing a complete brake system inspection.
4. What steps can I take to repair OBDII code C1014 in my Mercury for Brake System Total Volume Balance problems?
Repair options may include topping up brake fluid, bleeding the brake system to remove air bubbles, repairing or replacing faulty brake components, or resetting the ABS system.
5. Is it safe to drive my Mercury with OBDII code C1014 indicating Brake System Total Volume Balance issues?
It is not recommended to drive the vehicle when experiencing brake system problems as it can compromise safety. Have the issue diagnosed and repaired promptly.
6. Can a DIY enthusiast fix OBDII code C1014 related to Brake System Total Volume Balance in a Mercury?
While some basic maintenance tasks like checking brake fluid levels can be done by DIY enthusiasts, diagnosing and repairing complex brake system issues may require professional help.
7. How much does it typically cost to repair OBDII code C1014 in a Mercury for Brake System Total Volume Balance problems?
The cost of repair can vary depending on the specific issue, parts needed, and labor costs. It is advisable to get a quote from a trusted mechanic or dealership.
8. Are there any preventive measures to avoid OBDII code C1014 related to Brake System Total Volume Balance in a Mercury?
Regularly checking and maintaining proper brake fluid levels, inspecting the brake system for leaks, and addressing any brake warning lights promptly can help prevent such issues.
9. Can OBDII code C1014 in a Mercury for Brake System Total Volume Balance problems impact vehicle performance?
Yes, unresolved brake system issues indicated by this code can affect the vehicle's braking performance, ABS functionality, and overall safety on the road.
10. How long does it usually take to repair OBDII code C1014 in a Mercury related to Brake System Total Volume Balance?
The repair time can vary based on the specific problem identified during diagnosis. Simple tasks like topping up brake fluid may take a short time, while more complex repairs might require several hours or even days.
Discuss the causes and fixes for C1014 Mercury OBDII Code
Code C1014 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
